HDM1100 Digital Display Two way Alarm Temperature Controller

Min.Order: 1

Product origin: Nanjing, Jiangsu, China

Infringement complaint:

Complaint

US$ 30 ~ 40

Description

Product Overview:

HDM1100 Simple single loop digital display control instrument, fool operation, a 0.3 magnitude measurement precision, seven new appearance size, double four LED display, can support the thermocouple, heat resistance, voltage (root operation), current (root operation) and input in the transmitter, suitable temperature, pressure, flow, liquid level, humidity, such as industrial process monitoring.It supports 2-way alarm function, 1-way transformer output or RS485 communication interface using standard MODBUS protocol, 1-way DC24V feed output, photoelectric isolation of input end, output end and power end, 100-240V AC/DC or 12-36V DC switching power supply, standard snap-in installation, working environment temperature is 0-50ºC, and relative humidity is 5-85%RH without condensation.

Features:

1. Display panel appearance structure drawing

(1) PV display window (measured value)
(2) SV display window
Display input type and other parameters in measurement state
Displays the set value in the parameter setting state
(3) First alarm (AL1) and second alarm (AL2) indicator light, RUN light and output light (OUT)
(4) Confirm key
(5) Shift key
(6) Reduced bond
(7) Increase the key
The meter core can be pulled out of the case, the method is to remove the lock on both sides of the front panel of the meter to the outside, and then grab the front panel of the meter to pull out, the table core and the case can be separated.In the back, the watch core inserted into the case must be pushed tight, and lock lock lock, in order to ensure protection standards.

Outline dimensions and hole dimensions of the instrument:

Outline Dimension	Hole Dimension	Outline Dimension	Hole Dimension
160*80mm (Horizontal type)	152*76mm	48*96mm (Vertical Type)	45*92mm
80*160mm (Vertical Type)	76*152mm	72*72mm (Quadrate Type)	68*68mm
96*96mm (Quadrate Type)	92*92mm	48*48mm (Quadrate Type)	45*45mm
96*48mm (Horizontal type)	92*45mm

Structure Drawing:

The dimensions are A, B, C, D and E wiring diagrams
Note: The direction of the terminals on the back cover of horizontal and vertical instruments is different. As shown in figure 1.

F Wiring Diagram

H Wiring Diagram

Note: If different functions are marked on the same set of terminals in the wiring diagram above, only one of the functions can be selected.For example, RS485 communication function and transformer output function are on the same set of OUT terminals, only one of them can be selected.

Ordering Guide:

1. Specification		2. Graduation Input
Code	WidthHeightDepth	Code	Graduation (Measuring Range)
A	16080110mm (Horizontal type)	0	Thermocouple B(400~1800ºC)
B	80160110mm (Vertical Type)	1	Thermocouple S(0~1600ºC)
C	9696110mm (Quadrate Type)	2	Thermocouple K(0~1300ºC)
D	9648110mm (Horizontal type)	3	Thermocouple E(0~1000ºC)
E	4896110mm (Vertical Type)	4	Thermocouple T(-200.0~400.0ºC)
F	7272110mm (Quadrate Type)	5	Thermocouple J(0~1200ºC)
H	4848110mm (Quadrate Type)	6	Thermocouple R(0~1600ºC)
3. OUTPUT		7	Thermocouple N(0~1300ºC)
Code	Output Type ( load resistance RL)	8	F2(700~2000ºC)
X	No output	9	Thermocouple Wre3-25(0~2300ºC)
0	4-20mA(RL≤500Ω)	10	Thermocouple Wre5-26(0~2300ºC)
1	1-5V(RL≥250KΩ)	11	Thermal Resistance CU50(-50.0~150.0ºC)
2	0-10mA(RL≤1KΩ)	12	Thermal Resistance CU53(-50.0~150.0ºC)
3	0-5V(RL≥250KΩ)	13	Thermal Resistance CU100(-50.0~150.0ºC)
4	0-20mA(RL≤500Ω)	14	Thermal Resistance PT100(-200.0~650.0ºC)
5	0-10V(RL≥4KΩ)	15	Thermal Resistance BA1(-200.0.0~600.0ºC)
D1	RS485 communication interface (Modbus RTU)	16	Thermal Resistance BA2(-200.0~600.0ºC)
4. Alarm (Relay contact output)(See Note)		17	Linear Resistance 0~1KΩ(-1999~9999)
Code	Alarm Ways	18	Remote Resistance 0-350Ω (-1999~9999)
X	No Output	19	Remote Resistance 30-350Ω (-1999~9999)
1	1 way Alarm	20	0~20mV (-1999~9999)
2	2 way Alarm	21	0~40mV (-1999~9999)
5. Power Output		22	0~100mV (-1999~9999)
Code	Power Output (Output Voltage)	23	Internal retention
X	No output	24	Internal retention
P	Power Output(Load Current≤30mA)	25	0~20mA (-1999~9999)
P	Such as "P(24)"says Power Output24V.	26	0~10mA (-1999~9999)
6.Power Supply		27	4~20mA (-1999~9999)
Code	Voltage Range	28	0~5V (-1999~9999)
A	AC/DC 100-240V (AC/50-60Hz)	29	1~5V (-1999~9999)
D	DC 12-36V	30	Internal retention
7. Remark		31	0~10V (-1999~9999)
No remarks can be omitted		32	0~10mA Square Root (-1999~9999)
		33	4~20mA Square Root (-1999~9999)
		34	0~5V Square Root (-1999~9999)
		35	1~5V Square Root (-1999~9999)
		55	All Switch

Related Products:

Certification:

FAQ:

1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.

2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.

3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.

4. Q: What is lead time of your product?

A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.

5. Q: Do you provide customized products?

A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.

6. Q: What is your MOQ?

A: We have no MOQ limit, small quantity order is acceptable.

7. Q: What's the transport?

A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.

8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.

Forward

Related products