High active gps antenna U-GGB17S communication antenna
Features
1. Using multi feed point design to ensure the superposition of phase center and geometrical center which could minimize the influence of measurement error to lowest range
2. High gain of the antenna element and the direction map beam width to make sure the receiving satellites performance of low elevation mask
3. Resistance multipath effects board inside could reduce the measurement error caused by multipath
4. Water proof, shock proof and lightning resistance
Application
Survey antenna is the traditional RTK product standard antenna, can be widely used in land survey, marine survey, channel survey, seismic monitoring, bridge survey, container operation, etc.
Antenna Specification | |
Frequency Range | GPS L1/L2, GLONASS L1/L2,Beidou B1/B2/B3 |
Impedance | 50 Ohm |
Polarization | RHCP |
Axial Ratio | ≤3dB |
Azimuth Coverage | 360° |
Output VSWR | ≤1.5 |
Gainn at Zenith | 5.5dBi |
Phase Center Error | ≤2mm |
LNA Specification | |
LNA Gain | 40dB |
Noise Figure | ≤2.0 dB |
Output VSWR | ≤1.5 |
Ripple | ±1 dB |
Drain Voltage | 3--18VDC |
Current Consumption | ≤45mA |
Group Delay | ≤5 ns |
Mechanical Specification | |
Dimension | Φ146×58mm |
Connector | TNC Female |
Weight | 440g |
Base Screw Thread | 5/8"-11UNC |
Environmental Specification | |
Operating Temperature | -40°C to +85°C |
Storage Temperature | -55°C to +85°C |
Humidity | 95% Non-Condensing |
1.What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, T/T, credit card, Western Union.
6.What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction
7.Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
8.How about the shipping fees?
We usually use delivery express, such as DHL, FedEx, UPS, etc.