Pressure Steam Sterilizer Combine Microwave Technology Garbage Disposal Facility Infectious Hospital Clinical Medical Waste Management Treatment Equipment

Min.Order: 1
Product origin: Shangqiu, Henan, China
Infringement complaint: complaintComplaint
US$ 238000 ~ 400000

Description
Pressure steam sterilizer Combine Microwave technology Medical Waste Equipment Management System


Health care activities protect and save lives.But what about the waste and by-products that they generate?Biomedical waste management process can be expensive and difficult to set up for health care centers.An unsafe management can cause major issues:

 

Microwave technology

 

Medical waste treatment with microwave disinfection equipment can solve the problem of medical waste infecting humans and polluting the environment
 

Microwave disinfection technology principle

Microwave antivirus is the result of microwave thermal effect and biological effect, which can make microwave energy and bacteria directly interact, rapid sterilization.

1.The thermal effect of microwave energy:Under certain intensity microwave field, the bacteria will be due to the absorption of polarized molecules can increase the temperature of microwave, so that the protein deformation, loss of biological activity.The thermal effect of microwave mainly plays the role of rapid temperature sterilization.

2.Non-thermal effects of microwave energy:High frequency electric fields change the polarized molecular structure, resulting in the loss of vitality or death of proteins and physiologically active substances in the microbes, and the special effects of conventional physical sterilization.

Technical characteristics

Microwave disinfection technology uses a microwave sterilization time is short, fast, penetrating ability, inside and outside the temperature uniformity, saving energy, disinfection effect of good characteristics.

In the microwave field, the cell structure is destroyed, destroying the cell inside and outside the material balance, causing cell death.

The combination of microwave and water vapor makes the disinfection effect more effective.

Microwave disinfection does not produce dioxin and malodorous gases, no waste water.

 

Technologies Comparation

ItemsLiYing TechnologyAutoclaveAutoclave with a shedderIncinerator
(microwave process)(hot steam process)(hot steam process)(high-heat process)
Continuous processYESXXX
Integral shreddingYESXYESX
Unrecognisable wasteYESXYESYES
Volume of waste reductionYESXYESYES
Mass of waste reductionYESXXYES
Installation requirementsLowHighHighHigh
Complexity of the installationLowIntermediateIntermediateHigh
Possibility of installation "in situ"YESYESYESX
Technology approval and recognition by countries all over the worldHighIntermediateHighLow
Level of sterelizationHighIntermediateHighHigh
OdoursLowHighIntermediateIntermediate
Level of noiseLowIntermediateIntermediateHigh
Treatment of pathological and anatomical wasteYESXYESYES
Cost
ROIHighLowLowLow
Investment costsIntermediateLowIntermediateHigh
Operating costsLowHighHighHigh
Maintenance costsLowHighHighHigh
Labour costsLowHighHighHigh
Environment
Impact on the environmentNoIntermediateIntermediateHigh
Treated waste recyclableYESXXX
No contaminated rejection (such as water, steam)YESXXX
Security
No risk related to pressurized vesselYESXXX
Risk for workforce/personnel health (no risk of toxic contaminants released into the air or the treated waste)NoneIntermediateIntermediateHigh
Microwave advantages
ENVIRONMENTAL
Zero emission, no hazard airs or water release, no dioxin, without secondary pollution.
FLEXIBILITY
Fixed and Mobile type available, plug and play, flexible, convenient and energy-saving.
MARKET ACCEPTANCE
Significant advantages of high disinfection effect, simple operation, zero emissions allows the technology being quickly recognized by the market.
HIGH DISINFECTION EFFECT
Unique advantages of microwave with steam synergistic sterilization meet a fast and thorough sterilization rate.
SIMPLE OPERATION
High degree of automation and PLC control allows easy operation by ONE single person with simple training.
ECONOMICAL
Low investment, stable operation with simple maintenance. Only electricity and water are connected, it's efficient and economical.

Solution adapted to:

  •  
1.Every medical waste producers
CLINICS&HOSPITALSRESEARCH LABORATORIESCOMMERCIAL WASTE SERVICES

2.Any type of medical waste
  • Blood and Blood Products
  • Dialysis Waste
  • Animal Tissues, Body Parts, and Carcasses
  • Human Tissues, Body Parts, and Limbs
  • Biological and Non-Hazardous Pharmaceutical
  • Needles, Syringes, and other Sharps
  • Research Waste
  • Laboratory Specimens
  • Surgery Waste
  • Pathology and Histology Samples
  • Aids and Hepatitis Waste
  • Isolation Waste
  • Cultures and Slides
  • Intravenous Bags, Blood Bags, and Associated Tubing
  • Animal Bedding
  • Packaging Materials
  • Gloves, and Gowns Associated with Waste Collection
  • Trace Chemotherapy/anti-neo plastic waste

 

Product Description

Liying company's product, MDU series of medical waste microwave disinfection equipment adopts a fully automatic processing system of hydraulic lifting, material shredding, microwave disinfection, and spiral discharge, which is short in time and efficient, and can effectively save energy. The treatment process does not produce dioxin and odor gas, and there is no wastewater discharge. The killing rate of spores of Bacillus subtilis black variety is not less than 99.99%. All sterilization effect monitoring, exhaust gas monitoring, microwave leakage monitoring, etc. are qualified

This series of equipment is divided into two categories: skid-mounted fixed equipment and mobile microwave disinfection vehicle, according to different models and specifications, it can adapt to the requirements of various types of medical waste centralized disposal centers and emergency disposal, in situ disposal. The whole set of equipment only needs electric power drive
. 1 person can operate and the daily processing capacity of 0.1 tons -10 tons.
It has the advantages of low energy consumption, small footprint, low noise, cleanliness, environmental protection and can be turned off and on at any time according to the amount of medical waste, which greatly reduces the operating costs
. The mobile medical waste disinfection vehicle can be parked and operated, with its own generator, water tank and water purification equipment, providing medical waste on-site disposal services to and from many areas,safe and stable

Equipment Model No.MDU-3BMDU-5BMDU-10B
Dimensions (L*W*H)7900mm*2900mm*3300mm8500mm*2900mm*3300mm12000mm*2900mm*3300mm
Overall weight12000kg13000kg15000kg
Required space (L*W*H)12000*5000*5600mm12000*5000*5600mm15000*5000*5600mm
Installed Power115KW
(72KW steam generator included)
120KW
(72KW steam generator included)
170KW
(108KW steam generator included)
Treatment capacity180kg/h (±10%)300kg/h (±10%)600kg/h (±10%)
Operation and controlPLC control, automatic process
Shredding systemDouble-shaft shredder, automatic reverse system is configured to avoid material blockage.
Feeding formAutomatic lifting and charging system contained
Disinfection temperature≥95ºC
Disinfection duration≥45min
Disinfection effect≥6 log10 The treatment effect test uses Bacillus subtilis var. niger spore (ATCC 9372) as biological indicator, with killing logarithm value ≥ 6.00.
Microwave frequency2450+/-50MHz
Microwave generator power1.25KW * 8unit1.25KW * 10unit1.25KW * 20unit
ManpowerNo specialized operator / ONE



Processing
 

The infectious material is temporarily held in a waste container(s) which in turn, are emptied into an pre storage hopper via a charging system which is located at the front of the MDU, The infectious waste is fed to the shredding system by a feed arm where it is shredded. The shredded material is conveyed through a microwave section and temperature holding section, respectively for disinfection, with microwave of 2450MHz (±50MHz), temperature ≥95ºC, duration over 45minutes. The disinfected and unrecognizable (sharps) waste is then discharged into large waste containers (or compaction units) by the discharging screw conveyor. From there the material can be transported to a local municipal landfill for disposal or to a refuse recycling plant.

 

Company Profile

 

WHY US


 

 

About Us
Henan Liying Environmental Science and Technology Co., Ltd.is a commitment to medical waste harmless treatment technology research and development, equipment production and project investment and operation of the specialized companies, is a state-level high-tech enterprises and the National Environmental Protection Association member units. Companies in the "professional, dedicated, specifically" attitude, "harmless treatment of medical waste, for the benefit of future generations" as the core value, market-oriented, healthy and environmentally friendly, resource recycling-oriented, committed to In the medical waste treatment technology research and development, equipment production, project investment operations.
The company is located in the civil rights county high-tech development zone, The company has a number of invention patents, utility model patents and software copyright, research and development of microwave sterilization, carbonization pyrolysis and other medical waste disposal technology in the international leading level, through the GB / TI9001 international quality management system certification, CE certification by SGS, and has won the international Trade platform designated enterprise authorization certificate, scientific and technological achievements appraisal certificate, science and technology SME certificate, China 's environmental protection industry sustainable development key promotion project certificate. Investment, construction, operation or cooperation of municipal (county) medical waste disposal center in Shandong, Qingdao, Shijiazhuang, Hebei, Lankao, Luyi, Changyuan, Jiangxi Yingtan, Guizhou Zhenfeng, Pu'an, Sands, Yunnan Tengchong and Fengqing Project experience, the successful solution to Shandong Heze, Qingdao, Liaocheng, Hunan Changde City, Jiangxi Ji'an City, Jiangsu Qidong City, Guizhou Anshun City and other medical waste emergency treatment problems. Production of equipment exported to the United States, Britain, Brazil, India, Japan, Russia and other countries.
Service
  • Design of construction layout drawing
  • Project construction
  • Shipping and transportation
  • Installation and commissioning
  • Medical waste professional training
  • Project recruitment team
  • Assist operation management
 

Certifications

ISO 9001
Quality Management System Certivicate


 
ISO14001
Environmental Management System Certivicate


 
ISO45001
Occupataional Health and Safety Management System Certificate


 
CE
Verrification of MD Compliance
Test Standard:
Mechine Directive 2006/42/EC Annex I
EN ISO 12100:2010
EN 60204-1:2006+A1:2009
4 invention patents
76 utility model patents
24 software copyright registration certificates



Product INSPECTION REPORTS by

CCIC Central Plains Agricultural Products & Food Testing (Henan) Co., Ltd


 

Detailed Photos

Our Workshop


 

Our teams

 

social contribution
Mr. Zhang said in an interview that Liying Company's medical waste microwave disinfection equipment was developed in 2014. At the time of the epidemic outbreak in Wuhan, our microwave equipment has been more mature after several optimization and upgrading, and the sales situation is very good. In the face of the epidemic, the country has a need and we have a responsibility. Therefore, Liying decided to donate disinfection equipment to support Wuhan and dispatch multiple batches of staff to the front line of the epidemic during the subsequent epidemic period.

Shipping

Case


Customer's Projects
From equipment sales, technical services to investment and operation, hosting operations, emergency disposal, Liying company has completed the transformation and upgrading from a product manufacturer and seller to an industrial service provider. It can provide customers with one-stop guidance services from research, project approval, environmental impact assessment, plane planning and design, engineering construction, to production and operation. Liying company has rich experience in the operation and management of medical waste disposal projects. In recent years, Liying has invested, constructed, and operated more than 20 subsidiaries of medical waste centralized disposal projects in China

FAQ

Q1. Are you a factory or trading company?
We are a professional manufacturing factory since the year 2014. Welcome to visit our factory located in Minquan county, Henan province, China.

Q2. How can I visit your factory?

Visit us on site. You are always warmly welcome to visit our factory on site, just feel free to contact us for an invitation letter.
Visit our factory through online video. Or please never hesitate to contact us, our sales staff will contact you and take you to visit our manufacturing workshop and work site through online video.

Q3. Where is your factory? How can I get to your factory?
Our factory is located in Minquan county, Henan province, the nearest airport is Zhengzhou Xinzheng International Airport (CGO), and then two hours by car or train to our factory. Or you can also fly to Beijing or Shanghai air port, then get to your county by a high speed train.

Q4. How long about the delivery time for the medical waste disinfection equipment?
About 20 days to 60days for standard models, feel free to contact us for details.

Q5. Where will the disinfected medical waste go?
The medical waste after microwave disinfection treatment is non-infectious, non-hazardous and unrecognizable inert waste, which can be transported to the local domestic garbage landfill or incineration plant as ordinary domestic garbage for treatment, or part of the medical waste after disinfection treatment can be recycled accordingly. It should be properly handled according to your local laws and regulations.

Q6. I want to build a centralized treatment institute in our city, what could you help me?
Please feel free to contact us NOW, our experienced teams will give you sufficient suggestions on your projects, from marketing research, project scales choose, site selection, land layout, and including economic benefit analysis, operational model, etc. With our 19 centralized treatment centers experience in China, surely we'll help during the whole procedure.

Other Products

 

Clinical Waste on-site Treatment Device

     Used for medical waste on-site disinfection in Clinics, small hospitals, etc. 
Mobile Medical Waste Disinfection Vehicle

Used for treatment of medical waste in remote areas, or emergencies.
Medical Waste Transfer Vehicle

Used for medical waste tranported from hospitals or clinics to an centralized treatment center.

Will you have any customized inquiry, please never hesitate to Contact us ! 

 

 
Product Tag:
Related categories:
Scroll to Top