Complaint
HNC808D CNC Controller
HNC808D is a 2 to 4 axis CNC Controller.
With 10.4 inch color LCD display.
Support NCUC, etherCAT bus protocol.
Used for 2-4 axis CNC machines
What can you get by purchasing it?
Service response within 24 hours
Favorable price
Make sure to give you an economic solution with cnc controller kits including servo drive, servo motor, spindle motor.
Get a quotation; send an message NOW!
| Item | Specification | HNC-808 | |
| M(CNC milling) | T(CNC lathe) | ||
| Maximum number of simultaneously controlled axes in channel | 4 | 3 | |
| Maximum number of feed axes | 4 | 3 | |
| Maximum number of spindles in channel | 2 | 2 | |
| Number of PMC control axes | 1 | 1 | |
| Number of channels | Standard | 1 | 1 |
| Maximum | 1 | 2 | |
| Spindle/channel | Standard | 1 | 1 |
| Maximum | 2 | 2 | |
| Feed axis/channel | Standard | 3 | 2 |
| Maximum | 4 | 3 | |
| Maximum number of axes in simultaneous motion | 3 | 3 | |
| Maximum number of feed axes | 4 | 3 | |
| Maximum number of simultaneously controlled axes/channel | 3 | 3 | |
| Number of input/output points at maximum | 128/128 | ||
| Axis name(single channel) | Three basic axes X, Y, Z; additional axes: U, V, W, A, B, C | Standard | Not optional |
| Two basic axes X, Z; additional axes: Y, U, V, W, A, B, C | Not optional | Standard | |
| Axis name(multi-channel) | One or two characters plus number, the first must be a character, e.g. X1 | Not optional | Not optional |
| Gantry axis synchronization | Not optional | Not optional | |
| Tangent synchronization control | Not optional | Not optional | |
| Basic axis coupling control | Not optional | Not optional | |
| Electronic gear box | Not optional | Not optional | |
| Linear chart | Not optional | Not optional | |
| Inclined axis control | Not optional | Not optional | |
| Minimum input unit | mm, deg, inch | 10^-3 | |
| Metric/Inch | G20/G21 | Standard | Standard |
| Pulse unit input | G22 | Standard | Standard |
| Machine lock | Standard | Standard | |
| Emergency stop | Standard | Standard | |
| Overtravel | Standard | Standard | |
| Spatial protection area | Providing protection for workpiece and tool | Not optional | Not optional |
| Software limit | Standard | Standard | |
| Dynamic axis release/capture | G101/G102 | Not optional | Not optional |
| Synchronization between channels | G104.0 to G104.7 | Not optional | Not optional |
