Complaint
HNC818D CNC Controller
HNC818D is a 4 to 5 axis CNC Controller.
With 12 inch color LCD display.
Support NCUC, etherCAT bus protocol.
Used for 4-5 axis CNC machining cente
What can you get by purchasing it?
Service response within 24 hours
Favorable price
Make sure to give you an economic solution with cnc controller kits including servo drive, servo motor, spindle motor.
Get a quotation; send an message NOW!
Item | Specification | HNC-818 |
| M | ||
| Maximum number of simultaneously controlled axes in channel | 5 | |
| Maximum number of feed axes | 5 | |
| Maximum number of spindles in channel | 4 | |
| Number of PMC control axes | 3 | |
| Number of channels | Standard | 1 |
| Maximum | 2 | |
| Spindle/channel | Standard | 1 |
| Maximum | 2 | |
| Feed axis/channel | Standard | 3 |
| Maximum | 9 | |
| Maximum number of axes in simultaneous motion | 8 | |
| Maximum number of feed axes | 9 | |
| Maximum number of simultaneously controlled axes/channel | 4 | |
| Number of input/output points at maximum | 2048/2048 | |
| Axis name (single channel) | Three basic axes: X, Y, Z; additional axes: U, V, W, A, B, C | √ |
| Two basic axes: X, Z; additional axes: Y, U, V, W, A, B, C | ― | |
| Axis name (multi-channel) | One or two characters plus number, the first must be a character, e.g. X1 | √ |
| Gantry axis synchronization | ★ | |
| Tangent synchronization control | ★ | |
| Basic axis coupling control | ★ | |
| Electronic gear box | ★ | |
| Linear chart | ★ | |
| Inclined axis control | ★ | |
| Minimum input unit | mm, deg, inch | 10-4 |
| Metric/Inch | G20/G21 | √ |
| Pulse unit input | G22 | √ |
| Machine lock | √ | |
| Emergency stop | √ | |
| Overtravel | √ | |
| Spatial protection area | Providing protection for workpiece and tool | ★ |
| Software limit | √ | |
| Dynamic axis release/capture | G101/G102 | ★ |
| Synchronization between channels | G104.0 to G104.7 | ★ |
