Fiberglass surfacing tissue

Introduction of Fiberglass surfacing tissue

 

Fiberglass surfacing tissue is mainly used for the surface layers of FRP products. It has good capability like fiber dispersion, smooth surface, low binder content, fast resin impregnation and good mould obedience. It is capable of significantly improving the strength of FRP surface layer, strong impaction resistance, excellent uniformity of surface, good covering up the texture of under layers and good corrosion resistance.

 

 

Specification of Fiberglass surfacing tissue

 

Size: 20g/, 30g/, 35g/, etc.

Width: 50mm, 75mm, 100mm, 1000mm, etc.

Length: 400m, 500m, 1000m, etc.

 

 

Product Characteristics of Fiberglass surfacing tissue

 

1.Uniform fiber dispersion

2.Smooth surface and soft hand-feeling

3.Low binder content

4.Fast resin impregnation

5.Good mould obedience

6.Good corrosion resistance 

7.Strong impact resistance

 

Technical Data of Fiberglass roofing tissue: Fiberglass Battery Separator Tissue Mat

 

Item	Area Weight	Yarn Space	Tensile Strength (MD / CMD)	Roll Size	Loading Quantity
Unit	g/m2	mm	N/5cm	m x m	M2/40FCL
Specification	45	15 / 30	180 / 50	1.0 x 3600	144000
	50	15 / 30	230 / 80	1.0 x 3300	132000
	55	15 / 30	250 / 90	1.0 x 2900	116000
	60	15 / 30	250 / 110	1.0 x 2600	104000
	90	-	400 / 200	1.0 x 1600	64000
	100	-	430 / 220	1.0 x 1300	52000

 

Product Description: 

Glass Fiber Chopped Strand Mat

Fiberglass roofing tissue is mainly used as the substrate for waterproof roofing materials, such as waterproofing membrane, asphalt shingle, etc. It is characterized by high tensile strength, water & corrosion resistance, dimensional stability, high porosity and easy saturation with bitumen. The longitudinal strength can be improved further by incorporating reinforcements in the machine direction. Roofing products with fiber glass tissue has high strength, excellent uniformity, good weathering performance and resistance to leaking and aging.

Application of Fiberglass roofing tissue: 

Fiberglass Battery Separator Tissue Mat

An ideal substrate material for asphalt roofing rolls and shingles
Act as the lining for roof insulation layers to protect polymer foam insulation from the damaging effect caused by
chemical solvents in bitumen, so as to prolong the lifetime of heat insulation layer.

 

Specifications Glass Fiber Chopped Strand Mat

It is mainly used as substrates for water-proof roofing materials. It has the good character of high tensile strength, corrosion

Technical Data of Fiberglass roofing tissue: 

Glass Fiber Chopped Strand Mat

 

Item	Area Weight	Yarn Space	Tensile Strength (MD / CMD)	Roll Size	Loading Quantity
Unit	g/m2	mm	N/5cm	m x m	M2/40FCL
Specification	45	15 / 30	180 / 50	1.0 x 3600	144000
	50	15 / 30	230 / 80	1.0 x 3300	132000
	55	15 / 30	250 / 90	1.0 x 2900	116000
	60	15 / 30	250 / 110	1.0 x 2600	104000
	90	-	400 / 200	1.0 x 1600	64000
	100	-	430 / 220	1.0 x 1300	52000

  

  

Package: Each roll is wrapped with plastic film, 40 rolls are put into 1x40FCL with wooden pallets. If pallets are not needed, we can load 44 rolls in 1x40HQ. Based on quantity, special package is available