Complaint
| Material name | Connector Drilling BT 6-150 mm², 1-5 to 6 mm² AWG, 2 outputs | |
| Preformed material | steel | Synthetic (polyamide with FV) |
| Isolating material. | Neoprene | |
| Applied standards | NFC 33-020 | |
| Quality certificate | ISO-9001 or recent | |
| Material main line | Copper or aluminum isolated | |
| Material line derivation | Copper or allylated aluminum | |
| characteristics | ||
| Main conductor section | mm2 | 6-150 |
| Driver Section derivation | mm2 | 1.5 - 6 |
| Pair | N/m | Network 14 + - 1.5 / derv. 6 + - 1.0 |
| Departures | U | 2 |
| Voltage | V | 600 |
| DN-DS certificate | Attach certificate of acceptance and approval | |
| Identification mark | Each drilling connector must present the manufacturer's mark or symbol and the range of application | |
| Packaging | It must be packed in a cardboard box of high resistance, each connector must be wrapped in a transparent plastic bag, on the bag must present the technical data |
| Material name | BT Drilling Connector 1/0 - 2 to 1 / 0-6 | |
| Preformed material | steel | Synthetic (polyamide with FV) |
| Isolating material. | Neoprene | |
| Applied standards | NFC 33-020 | |
| Quality certificate | ISO-9001 or recent | |
| characteristics | ||
| Type of tightening | Simultaneous | |
| Body | Synthetic material | |
| Tooth | Aluminium alloy | |
| Pieces | Galvanised steel | |
| characteristics | ||
| Valid section | mm² | 56 |
| Torque | daNm | 25 |
| Main driver | AWG | 1 / 0-2 |
| Secondary conductor | AWG | 1 / 0-6 |
| Departure | 2 | |
| DN-DS certificate | Attach certificate of acceptance and approval | |
| Identification mark | Each drilling connector must present the manufacturer's mark or symbol and the range of application | |
| Packaging | It must be packed in a cardboard box of high resistance, each connector must be wrapped in a transparent plastic bag, on the bag must present the technical data |
| Material | ||
| Material standard | ||
| Range of conductor cross-section | 16…50/2.5…35 | |
| Range of conductor diameter, Al/Cu | mm2 | |
| Tensile strength | KN | 5 |
| Thickness of zinc coating, | mm | 43 |
| Test voltage at 50Hz for one minute in water | kV | 6 |
