Complaint
| Parameter | Unit | Min. | Typical | Max. |
| Storage Temperature | °C | -40 | 85 | |
| Operating Case Temp for C-temp | °C | 0 | 70 | |
| Operating Relative Humidity | % | 5 | 95 | |
| Power Supply Voltage | V | 3.15 | 3.3 | 3.45 |
| Supply Current | mA | 600 | ||
| Bit Rate for Tx | Gbps | 2.488 | ||
| Bit Rate for Rx | Gbps | 1.244 | ||
| Parameter | Unit | Min. | Typical | Max. |
| Transmitter | ||||
| TX Central Wavelength | nm | 1480 | 1490 | 1500 |
| Spectral Width (-20dB) | nm | 1 | ||
| Side Mode Suppression Ratio (SMSR) | dB | 30 | ||
| Mean Launched Power (BOL) | dBm | 7 | 7.5 | 10 |
| Mean Launched Power (TX Off) | dBm | -45 | ||
| Extinction Ratio | dB | 8.2 | ||
| Optical Return Loss Tolerance | dB | -12 | ||
| Transmitter and dispersion Penalty | dB | 1 | ||
| Transmitter Mask(PRBS223[email protected]) | Compliant With ITU-T G.984.2 | |||
| Receiver | ||||
| Receive Wavelength | nm | 1290 | 1310 | 1330 |
| Sensitivity (BOL) (PRBS223[email protected],ER=10,BER<10-4) | dBm | -33 | ||
| Sensitivity (BOL) (PRBS223[email protected],ER=10,BER<10-10) | dBm | -31 | ||
| Overload (PRBS223[email protected],ER=10,BER<10-10) | dBm | -12 | ||
| Receiver Burst Mode Dynamic Range | dB | 15 | ||
| Damage Threshold for Receiver | dBm | 5 | ||
| SD Assert Level | dBm | -33 | ||
| SD De-assert Level | dBm | -45 | ||
| SD Hysteresis | dB | 0.5 | 6 | |
| WDM Filter isolation to 1550nm | dB | 38 | ||
| WDM Filter isolation to 1650nm | dB | 35 | ||
| Electrical Interface Characteristics | ||||
| Data Input Swing Differential/TX | mV | 200 | - | 2000 |
| Data Output Swing Differential/RX | mV | 400 | 1600 | |
| Date Differential Impedance | Ω | 90 | 100 | 110 |
| LVTTL Output High | V | 2.4 | Vcc | |
| LVTTL Output Low | V | 0 | 0.4 | |
| LVTTL Input High | V | 2.0 | Vcc+0.3 | |
| LVTTL Input Low | V | 0 | 0.8 | |
| Timing Characteristics | ||||
| Guard Time (Tg) | ns | 25.6 | ||
| Reset Pulse Width (Tr) | ns | 12.8 | ||
| Reset Delay (Trd) | ns | 12.8 | ||
| Receiver Preamble Time (Tp) | ns | 140 | ||
| SD Assert Time (TSDA) | ns | 100 | ||
| SD De-assert Time (TSDD) | ns | 12.8 | ||
| RSSI Trigger Delay (Ttd) | ns | 25 | ||
| RSSI Trigger Pulse Width (Tw) | ns | 500 | ||
| Internal I2C Delay (Twait) | us | 500 | ||
| Pin No. | Symbol | Level / Logic | Description |
| 1 | VeeT | Module Transmitter Ground | |
| 2 | Tx_Fault | LVTTL-O | Module Transmitter Fault |
| 3 | Tx_DIS | LVTTL-I | Laser output is disabled when this pin is asserted high or left unconnected |
| 4 | SDA | LVTTL-I | 2-Wire Serial Interface Data Line |
| 5 | SCL | LVTTL-I/O | 2-Wire Serial Interface Clock |
| 6 | MOD_ABS | LVTTL-O | Module Absent, connected to ground in the module |
| 7 | RX_Reset | LVTTL-I | Receiver RESET signal |
| 8 | RX_SD | LVTTL-O | Receiver Signal Detected Indication |
| 9 | RSSI_TRIG | LVTTL-I | Receiver RSSI Trigger signal |
| 10 | VeeR | Module Receiver Ground | |
| 11 | VeeR | Module Receiver Ground | |
| 12 | RD- | LVPECL-O | Receiver Inverted Data Output |
| 13 | RD+ | LVPECL-O | Receiver Non-Inverted Data Output |
| 14 | VeeR | Module Receiver Ground | |
| 15 | VccR | Module Receiver 3.3V Supply | |
| 16 | VccT | Module Transmitter 3.3V Supply | |
| 17 | VeeT | Module Transmitter Ground | |
| 18 | TD+ | LVPECL-I | Transmitter Non-Inverted Data Input |
| 19 | TD- | LVPECL-I | Transmitter Inverted Data Input |
| 20 | VeeT | Module Transmitter Ground |
