Categories

Pza Pneumatic Fittings Quick Coupling for Automation
Pza Pneumatic Fittings Quick Coupling for Automation
Pza Pneumatic Fittings Quick Coupling for Automation
Pza Pneumatic Fittings Quick Coupling for Automation
Pza Pneumatic Fittings Quick Coupling for Automation
Pza Pneumatic Fittings Quick Coupling for Automation

Pza Pneumatic Fittings Quick Coupling for Automation

Min.Order: 10
Product origin: Wenzhou, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 0.091

Description
TypePM stright bulkhead
SizeTube 4-16mm 
FluidClean air
Used hosePUhose or Nylon hose
Max Pressure0-1.0mpa
Min Pressure0-1.0mpa
Used temperature0-60ºC
Used Pressure0-1.0mpa

Tips for choosing a quick coupler

01: How to choose a quick coupler:
1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used.
2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break.
3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe
4. General industrial water can be used.
5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage.

02: How to install the quick connector?
1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars.
2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin.
3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to avoid the joint damage, the tube damage, cracking or falling off.
4. When piping and fittings are screwed in, do not mix the chips of the piping thread and the small pieces of sealing material into the pipe. When using the sealing tape, leave the thread head about 2 pitches free and not wrap the sealing tape.

03: In which environments are quick connectors used?
1. Do not use quick connectors in electrostatic sensitive occasions, which will cause poor system actions and malfunctions.
2. Do not use the quick connector in the occasions where sparks occur. Sparks may cause fire hazards.
3. Do not use it in an environment where cutting oil, lubricating oil and coolant are in direct contact with liquids.


 
Related products
Pza Pneumatic Fittings Quick Coupling for Automation
Pza Pneumatic Fittings Quick Coupling for Automation
US$ 0.091
Pza Quick Connecting Coupling Cross Four Way Pneumatic Pipe Tube Fitting, 4 Way Pneumatic Plastic Union Cross Tube Fittings
Pza Quick Connecting Coupling Cross Four Way Pneumatic Pipe Tube Fitting, 4 Way Pneumatic Plastic Union Cross Tube Fittings
US$ 0.146
Pneumatic Quick Coupling, Push Lock Fittings, Air Hose Coupling
Pneumatic Quick Coupling, Push Lock Fittings, Air Hose Coupling
US$ 0.1 ~ 1
stainless steel Quick Coupling Microduct Push in Pneumatic Fittings
stainless steel Quick Coupling Microduct Push in Pneumatic Fittings
US$ 1.5 ~ 36.9
Plastic Quick Connect Tee Tube Joints Air Hose Fittings PE Pneumatic Connector Pneumatic Quick Coupling
Plastic Quick Connect Tee Tube Joints Air Hose Fittings PE Pneumatic Connector Pneumatic Quick Coupling
US$ 0.09
Pneumatic Quick Release Coupling Kq2f Series Push in One Touch Pneumatic Fittings
Pneumatic Quick Release Coupling Kq2f Series Push in One Touch Pneumatic Fittings
US$ 0.13
PE-8 Plastic Quick Connect Tee Tube Joints Air Hose Fittings PE Pneumatic Connector Pneumatic Quick Coupling
PE-8 Plastic Quick Connect Tee Tube Joints Air Hose Fittings PE Pneumatic Connector Pneumatic Quick Coupling
US$ 0.1 ~ 5
Fast One -Touch Hose Fittings Iron Quick Pneumatic Disconnect Coupling for 4mm-35mm
Fast One -Touch Hose Fittings Iron Quick Pneumatic Disconnect Coupling for 4mm-35mm
US$ 0.5 ~ 1
Customers Also viewed
PU Series Straight 2 Way Plastic Pneumatic Fittings Quick Coupling Fitting Tube-to-Tube Push in Fitting
PU Series Straight 2 Way Plastic Pneumatic Fittings Quick Coupling Fitting Tube-to-Tube Push in Fitting
US$ 0.043
Hot Sale 8/5mm Push Fit Quick Connector Microduct Straight Coupling Pneumatic Hose Fittings
Hot Sale 8/5mm Push Fit Quick Connector Microduct Straight Coupling Pneumatic Hose Fittings
US$ 0.09 ~ 0.29
Pneumatic SS316 Quick Connect Coupling Rapid Twist Couplers Effortless Screw-on Fittings
Pneumatic SS316 Quick Connect Coupling Rapid Twist Couplers Effortless Screw-on Fittings
US$ 1.25
Quick Coupling Connector Brass Threaded-to-Tube Pneumatic Fittings Air-Tube Connector
Quick Coupling Connector Brass Threaded-to-Tube Pneumatic Fittings Air-Tube Connector
US$ 0.1 ~ 1
Quick Connector Hose Fittings Hose Quick Coupling
Quick Connector Hose Fittings Hose Quick Coupling
US$ 0.5
Product Tag:
Related categories:
Scroll to Top