Complaint
Cell phone Amplifier Description: 2000mW 5.8Ghz 33dBm WiFi Signal Booster
| SKU | 0305SH200738 |
| Model | SHRC58G2WP |
| Operating Range | 5.0~5.875 GHz |
| Operating Mode | Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode |
| Input power | 0~20 dBm |
| Transmit gain | 15-18dB |
| Output Power | 2W (33dBm) |
| Receiver Gain | ≤ 12 dB |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | SMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA female(pin inside) |
| Power supply | 5V~16V/2A DC |
| Operating Temperature | -20°C to + 70°C |
| Operating Humidity | Up to 75% relative humidity |
| Material | Cast Aluminum |
| Booster Size | 7.3 x 3.8 x 1cm |
| Booster Weight | 46g |
All specifications of PA can be customized based on customer requirement.
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.
3. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
Package contents:
About us
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
