2021 High quality/High cost performance Sterilizer for Beverage Filling Production Line

Min.Order: 1
Product origin: Suzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 3000

Description

    TG series tubular sterilizer is widely used in the food industry, like heating of milk, juice, beverage or other similar heat-sensitive products, with service life more than 3-6 months, which is the advanced full automatic sterilizing system in China.
   The equipment adopts the international advanced computer program control technology, to control the whole production, monitor the system works under aseptic condition strictly. If work overtime, it will start the sterilizing procedure automatically, to start sterilizing of equipment again, and then turn to production status to go on with production.
  There's CIP cleaning system on the machine to make automatic cleaning.

    Material inlet 45ºC→Sterilizing 135ºC(heat preservation 4s)→Material outlet 88ºC
    Material inlet temperature   45ºC
    Material inlet pressure   2~2.5Kg/cm2
    Material outlet temperature  88ºC
      Sterilizing temperature     135ºC(heat preservation 4s)
    Cooling water inlet temperature  <40ºC
    Cooling water flux          3T/H
    Tap water pressure         2~2.5Kg/C
    Steam inlet pressure       5~10Kg/Cm2
    Compressed air pressure   6~10Kg/Cm2
    Compressed air consumption  0.2~0.6M3
    Power supply         380V(8KW 3-phase 4-line)

    Cooling water, tap water and ice water pipes: To choose the suitable diameter of the pipes according to the total flux, the inlet pressure should between 0.2~0.25Mpa, the cleaning water will be used as washing and recycling water, so will be with good quality, and softened properly.

 
Serial numbername
 
quantityunitremarks
1Multifunction ultra-temperature sterilizer system1SetsBr type heat-exchanging
plate motor
2moon spanner1piecerandom tool
3seal cushionΦ100×Φ120×516piecerandom spare parts
4seal cushion Φ59×Φ50×512piecerandom spare parts
5operational manual1piecerandom file



   Plate type sterilizer

1. The usual equipment of the machine includes: motor sterilization 1set, materials balance tank 1set, materials conveyor pump 1set, materials filter 1set, materials return control valve 1set, warm water balance tank 1set,hot water heating plate 1set,steam filter, steam press reduction and steam flowrate valve and so on 1set, Electrical control cabinet 1set , and any other equipment with Accessories.
2. Entering Temperature of the material:10ºC
3. Sterilizing Temperature of the material :1370ºC
4. Time of sterilization: 5 seconds
5. CIP: the washing temperature is 80ºC, the consistency of alkaline washing is below 2.5% and the consistency of acid washing is1.2%.
6. Temperature of Pre-disinfection:90ºC
7. Outlet temperature of the material :10ºC
8. Sterilization temperature control precision: Qualified control precision is ±1ºC, The best control precision is ±0.5ºC.




  Ultra-High Temperature Instantaneous Sterilizer

1.treatment capacity: 1T/h, 2T/h
2.disinfection temperature :115-135ºC
3.steam pressure :0.78Mpa
4.high temperature treatment time:4-6 S
5.output temperature: <45ºC( Add cool pipe)
6.Output Temperature: <65ºC
7.steam consumption: <0.15kg/L material
8.motor power:
Adopt one piece of centrifugal pump, 1.5KW, 2.2KW
Adopt two pieces of centrifugal pump, 3KW, 4.4KW.
9.Equipment Weight: 410KG, 480KG.
10.Occupy area: 0.8m2, 0.9m2


   The structure of ultra temperature instantaneous sterilizer. Inside the main machine, there is pressure container---high temperature tank, which is used for steam storage. The outside of tank is double-tubes coil pipe, which is used for cold-hot exchanging for input and output material. Inside of tank installs spiral single tube , which is used for indirect heating.


Product Tag:
Related categories:
Scroll to Top