Programmable Climatic Test Chamber with Xenon Lamp for Process Control Testing

Min.Order: 1
Product origin: Dongguan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 2000 ~ 8000

Description
Programmable climatic test chamber with xenon lamp for process control testing
 

Application
Temperature and Humidity Test Chamber is able to provide rapid product temperature change rates and use varying levels of relative humidity to locate design problems prior to shipping your products, improving product quality and reliability.

Standard configurations:
Sight window X 1
Cable port (port Ø 50mm) X 1
Shelves X 2
Chamber lamp X 1
Power cable X 2m
No fuse breaker, over-pressure, over-heat and over-current for compressor, over-temperature, overloading of blower, dry heat-protection
Optional accessories:
Cable port: Ø 100mm is available
Shelves
RO-type water purifier: R-80/day
Provided to keep the humidifying heater and wet bulb wick free from scale
Inner glass door with operating port: A glass door can be provided behind the main door so that specimens can be observed
Two operating ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low-humidity (5° C 5% RH) for electronics

Description:
Workspace volume: (W)1000 x (H)1000 x (D)1000mm
Exterior size: (W)1280 x (H)2160 x (D)1950mm
Temperature range: -40~-150° C
Temperature constancy: ± 0.5° C
Temperature uniformity: ± 2.0° C
Temperature change rate: -40~+100° C within 45 minimum (with empty load), +20~-40° C within 60min (with empty load)
Humidity range: 20 - 98% RH
Humidity uniformity: ± 3.0% RH
Humidity constancy: ± 2.5% RH
Insulation:
Exterior, baked painting steel or stainless steel (SUS304)
Interior, mist finishing stainless steel (SUS304)
Insulation material, rigid polyurethane foam and glass fiber
Door: Heating wire was installed to prevent condensation in case of low-temperature
Inspection window (W X H): 2 sets 2, 470 X 570mm inspection window, made of multi-layer coated hollow electric glass, effectively insulation and prevents condensation
Light device: 11W/220V AC X 1 installed on the inspection window
Water outlet: Water outlet available for condenser
Water replenishment: Water pump

Optional accessories
Cable Port: Φ 100mm cable port is available
Shelves
Ro-type water purifier: R-80/day
Provide to keep the humidifying heater and wet bulb wick free from scale.
Inner glass door with operation port
A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door.
Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (5° C 5%RH) for electrostatic reliability tests.
Temperature and humidity recorder
-100 to +150° C/0 to 100%RH 100mm with effective width 100mm and 2 pen
Temperature 1 pen and humidity 1 pen.
-100 to +150° C/0 to 100%RH 100mm with effective width 100mm and 6 dots
Temperature 3 dots and humidity 1 dot.
-100 to +150° C/0 to 100%RH 100mm with effective width 180mm and 12 dots
Temperature 6 dots and humidity 6 dots.
Defrosting circuit
The chamber automatically detects and melts the frost on the evaporator when operating below
0° C.
Liquid or infection
In order to rapidly decrease the temperature inside the chamber, a cylinder of liquid can be connected the chamber
Besides this chamber, we also supply Walk-in Constant Temperature and Humidity Chamber, Solar panel test chamber, 3-zone thermal shock chamber, 2- zone thermal shock chamber, Rapid Temperature Change Chamber, High and Low Temperature Altitude Test Chamber, Temperature/ Humidity /Vibration three integrated Chamber, . Precising Drying Test Chamber, Vacuum oven / No oxidation Oven, Air Exchange Type Aging Oven, Burn-in Room, Salt spray Chamber, Two wings Drop tester, Vibration Testing Machine

The technical parameter is as the following:
Environmental Temperature and Humidity Chamber
Secifications ( at +20ºC room temp.  Or+25ºC water temp with empty load)
ModelKMH-R seriesKMH-L seriesKMH-S series
150R225R408R800R1000R150L225L408L800L1000L225S408S800S1000S
Temp. range -20ºC~150ºC -40 ºC~+150ºC -70ºC~+150ºC 
Interior sizelW(mm)600700700100010006007007001000100070070010001000
H(mm)600700750100010006007007501000100070075010001000
D(mm)460480800800100046048080080010004808008001000
Exterior sizeW(mm)880980980128012808809809801280128098098012801280
H(mm)17301890194021602160173018901940216021601890194021602160
D(mm)14001460174017501950140014601740175019501460174017501950
Power(KW)5.867.512.812.87.57.58.514.514.59.510.618.518.5
Weight(KG)240280400500580250300420530600330450550650
Humidity uniformity±3.0%R.H±5.0%R.H±3.0%R.H±5.0%R.H±3.0%R.H±5.0%R.H
Heat up time -20ºC~+100ºC,within 35 min -40ºC~+100ºC, within 45 min -70ºC~+100ºC,within 60 min
Pull down time +20ºC~-20ºC, within 45 min +20ºC~-40ºC , within 60 min +20ºC~-70ºC,within 80 min
Standard accessoriesSight window*1,  cable port(portΦ50mm)*1,  shelves*2,   chamber lamp*1,   power cable *2m
Safety device  (standard)No fuse breaker, over pressure\over heat and over current protection for compressor,
Over temp. protect, over load protect of blower, dry heat protection
Control SystemBalanced Temperature & Humidity Control System
Refrigeration systemAir Cooled (Water Cooled Type is option)
Hermetic compressor,Single stage refrigeration system,                         CFC-Free refrigerant(HFC-507/HFC-23)Hermetic compressor, Cascade Refrigeration ,            CFC free refrigerant                          (HFC-507/HFC-23)
ControllerPanel:7-inch LCD Touch panel,   Chinese or English display selectable
Operation model :Program or fix point running
Memory capacity :120programs,1200steps,
All repeat 999 cycles, part repeat 99 cycles
Humidity Range20~98%R.H
Temp. constancy±0.5ºC  
Humidity constancy±2.5%R.H
Temp. uniformity±2.0ºC
Interior materialStainless Steel Plate(SUS 304)
Exterior materialBaked Painting Steel Or Stainless steel(SUS304)
Insulation materialRigid polyurethane Foam and Glass Fiber Wool
Ambient Temp.+5ºC~+35ºC
Wiring method AC 380±10%50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available
Product Tag:
Related categories:
Scroll to Top