The industrial oil-water separator adopts the gravity separation method, which makes use of the density difference between oil and water and the incompatibility between oil and water to realize the separation of oil droplets, suspended solids and water in the static or flowing state. It is a traditional physical method to separate oil from water. From a practical point of view, gravity separation process does not need additional power, does not consume chemicals, does not cause secondary pollution, and has low operation and maintenance costs. YJ series industrial oil-water separator adopts structural design, which can effectively separate the residue, floating oil and sludge in sewage. At the same time, it can be equipped with air flotation device to accelerate oil-water separation.
How to use the product / product
The industrial oil-water separator is a new type of oil-water separation product developed by our company. It is simple and convenient to operate. It is widely used in the treatment of oily wastewater and degreasing wastewater in the food industry. After separation, the oil content in the water is less than or equal to 5mg / L, which fully meets the wastewater discharge standard
Industrial oil water separator / preparation before use
1. Before use, it should be placed close to the sewage source as far as possible to shorten the length of the water pipe and reduce the resistance of the pipe.
The oil-water separator should be as short as possible, and the oil-water separator should be as close as possible to the industrial oil separation device.
Operation method of oil water separator
1. Connect the inlet and outlet water pipes and drain pipes, close the drain valve and outlet ball valve, connect the inlet pipe to the sewage tank, and open the inlet valve.
2. The industrial oil-water separator enters the normal working state. At this time, the clean water is discharged from the water outlet, the oil collection chamber begins to collect oil, and the oil-water interface begins to decline.
Before each shutdown, clean water should be filled into the chambers of the water industrial oil-water separator, and the inlet and outlet ball valves should be closed.
Complaint
