Complaint
Finger oximeter. Pulse oximetry transducer properly placed on a finger. Fold the Oxisensor over the end of the digit.A pulse oximeter works by passing a beam of red and infrared light through a pulsating capillary bed. The ratio of red to infrared blood light transmitted gives a measure of the oxygen saturation of the blood.Fingertip Pulse Oximeter with alarm is designed to provide an affordable yet accurate way for spot-checking blood oxygen saturation levels and pulse rate.Pulse oximetry is a noninvasive method for monitoring a person's oxygen saturation (SO2). Though its reading of SpO2 (peripheral oxygen saturation) is not always identical to the more desirable reading of SaO2 (arterial oxygen saturation) from arterial blood gas analysis, the two are correlated well enough that the safe, convenient, noninvasive, inexpensive pulse oximetry method is valuable for measuring oxygen saturation in clinical use.
In its most common (transmissive) application mode, a sensor device is placed on a thin part of the patient's body, usually a fingertip or earlobe, or in the case of an infant, across a foot. The device passes two wavelengths of light through the body part to a photodetector. It measures the changing absorbance at each of the wavelengths, allowing it to determine the absorbances due to the pulsing arterial blood alone, excluding venous blood, skin, bone, muscle, fat, and (in most cases) nail polish.
Why choose our Fingertip Pulse Oximeter?
1.Reliable accuracy and durability
2.LED Display, four display modes.
3. Low voltage indicator, Real-time spot-checks.
4.Low power consumption,50 hours continuous to work.
5.Low Perfusion ≤0.4%
6.Automatically power off when no signal in the oximeter for more than 8 seconds
7.Small and light weight, convenient to carry
Widely used in hospital, home healthcare, oxygen bar, community medical centre, alpine area, sports healthcare etc.
