Categories

NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake

NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake

Min.Order: 1
Product origin: Changzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 102.26 ~ 111.15

Description
HYBRID STEPPING MOTOR  86STH150+Brake

General  Specifications:
Step Angle ----------------------------------------------------------------------------------------------------------------1.8° (full step)
Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)
Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%
Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%
Temperature Rise ----------------------------------------------------------------------80ºC Max(rated current, 2 phases on)
Ambient Temperature Range ----------------------------------------------------------------------------------------  -20ºC∽+50ºC
Insulation Resistance ---------------------------------------------------------------------------------------  100MΩ Min. 500VDC
Dielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 Minute
Insulation Class ------------------------------------------------------------------------------------------------------------------ B class   



Electrical  Specifications:
ModelL
Motor Length
(mm)		Holding
Torque
(N.cm)
Min.		Rated
Current
(A)		Phase
Resistance
(Ω)		Phase
Inductance
(mH)		Rotor
Inertia
(g.cm²)		Lead
Wire		Detent
Torque
(N.cm)
Max.		Motor
Weight
(g)
86STH65406524040.653.30.84101.9
86STH70607034060.41.71.04122.1
86STH80608045060.453.01.234152.3
86STH1006010072860.504.82.74203.3
86STH1186011887060.575.53.34303.7
86STH13060130100060.65.84.04354.0
86STH15060150120060.76.85.04455.5

*Shown in the table is the representative product. It can be customized according to the requirements of users.
 

Features: 1) Excellent torque frequency characteristics, low noise, low fever, big brake torque, fast response

Shaft:

                                                                                                                   
End:
2-Phase Digital Stepping Motor Driver
CF2068M
Overview
CF2068M is a 2-phase hybrid stepping motor driver based on DSP control. It is a new
generation of digital stepping motor drive which combines advanced DSP control chip and 2-phase
inverter drive module. The drive's voltage is between AC20-80V, adapter current is below 6.0A and
86-110MM diameter of all kinds of 2-phase hybrid stepping motors. It uses a similar servo control
circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor
is at high speed, its torque is much higher than other hybrid stepping motors. Positioning accuracy is
up to 51200 steps / turn. The product is widely used in engraving machine, medium-sized CNC
machine tools, computer embroidery machine, packaging machinery and other high resolution, large
and medium-sized CNC equipment.

Key Features:
  • High performance and low price
  • Equipped with 16 scales constant torque moment subdivision, the maximum resolution is 40,000 steps / turn
  • The maximum response frequency is up to 200KPPS
  • When a stepping pulse stops more than 1.5S, the coil current will be automatically reduced to half of the set current
  • Optical isolation signal input / output
  • Drive current 2.0A / phase to 6.0A / phase 8 scales adjustable
  • Single power input, voltage range: AC20~80V orDC24V~110V
  • The phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase.)
Current Setting:
The operating current of the drive is set by the SW1-SW3 terminals, which switch for normal working output current (See the table below).
Operating current Ir(A)2.02.573.143.714.284.865.436.0
SW1ONOFFONOFFONOFFON OFF
SW2ONONOFFOFFONONOFFOFF
SW3ONONONONOFFOFFOFFOFF
Subdivision Settings:
The drive's subdivision is set by SW5-SW8 terminals. It has 16 scales. SW4 is function set. Subdivision reference table(pulse / revolution)
Subdivision400800160032006400128002560051200 
SW5ONOFF ONOFF ONOFF ONOFF  
SW6ONONOFF OFF ONONOFFOFF 
SW7ONONONONOFF OFF OFFOFF 
SW8ONONONONONONONON 
Subdivision10002000400050008000100002000040000 
SW5ONOFFON OFFON OFFON OFF 
SW6ONONOFFOFF ON ON OFFOFF 
SW7ONONONONOFFOFFOFFOFF 
SW8OFF OFFOFFOFFOFFOFFOFFOFF 
SW4ONFull Current
 
OFFHalf Current
  1. Input voltage cannot exceed AC 80V or DC110V.
  2. Input control signal level is 5V. When higher than 5V, it needs to connect to a current limiting resistor.
  3. Input pulse signal's falling edge is valid.
  4. The fault indicator Fault light will be on when the drive's temperature exceeds 80ºC and stops working. Until the drive's temperature drops to 50ºC, it needs to re-power to resume work. Please install a radiator to protect excessing heat.
  5. When Fault light for over-current (load short-circuit) fault indicator is on, please check the motor wiring and other short-circuit faults, then Re-power the motor for recovery after cleaning faults.
  6. When Fault light for no-motor fault indicator is on, please check the motor wiring, then re-power for recovery after cleaning faults.

 

Field 


Packing:
Hard cardboard or wooden box with foam inside.

Shipping:
Normally the delivery time is within 10 days according to customer's choice or ship by the best express company to the destination.

Delivery:
1.with over 17 years of manufacturing experience, any type of customizing is available.
2.with perfect service system, we can provide you with first class pre and after sale service.
3.we have enough storage of each type of products, with first class packaging and shipping, make sure  accurate delivery.
4.professional sales consultants give you all answers about our proucts.

Certificate:

FAQ: 
Question1: What is your service time:
Answer: 24 hours online service. Email will be replied within 12 hours.

Question2: What about your products' warranty?
 Answer: 1 year. For sea orders, the warranty is 15 months.

Question3: Do you have any certificate?
Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.

Question4: Do you offer ODM and OEM Service?
Answer: Yes. ODM products according to customized design and specification as well as OEM products.

Question5: What is the delivery time?
Answer: For samples, 10-30 days according to the differnet produced difficulty. For bulk, normally 20-30 days. For customized order, the delivery can be negotiated.
Related products
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
NEMA34 Series 2 Phase 86mm Hybrid Step/Stepping/ Stepper Motor 86sth150 with Permanent Magnet Brake
US$ 102.26 ~ 111.15
NEMA34 86mm Hybrid Step/Stepping/ Stepper Motor with Permanent Magnet Brake
NEMA34 86mm Hybrid Step/Stepping/ Stepper Motor with Permanent Magnet Brake
US$ 87.86 ~ 95.5
2 Phase Hybrid Stepper Motor with Permanent Magnet Brake and Reducer 57sth112
2 Phase Hybrid Stepper Motor with Permanent Magnet Brake and Reducer 57sth112
US$ 102.4 ~ 111.15
57 Series NEMA 23 1.8 Degree 2-Phase 2.2n. M 4A Electric Hybrid 4-Lead DC Brushless Step Stepper Motor with Permanent Magnet Brake
57 Series NEMA 23 1.8 Degree 2-Phase 2.2n. M 4A Electric Hybrid 4-Lead DC Brushless Step Stepper Motor with Permanent Magnet Brake
US$ 30.5 ~ 45
NEMA34 86mm 8.5nm Holding Torque 4.9A 1.8 Degree 2-Phase 8-Wire Hybrid DC 24V-90V AC 20V-70V Stepper Stepping Motor and Driver Kit for 3D Printer
NEMA34 86mm 8.5nm Holding Torque 4.9A 1.8 Degree 2-Phase 8-Wire Hybrid DC 24V-90V AC 20V-70V Stepper Stepping Motor and Driver Kit for 3D Printer
US$ 78 ~ 89
2-Phase 1.8 Degree NEMA34 86mm 5A 6.5n. M Hybrid Brushless DC 24V-90V AC 20V-70V Digital Stepper Stepping Motor and Driver Controller Kit
2-Phase 1.8 Degree NEMA34 86mm 5A 6.5n. M Hybrid Brushless DC 24V-90V AC 20V-70V Digital Stepper Stepping Motor and Driver Controller Kit
US$ 76 ~ 87
NEMA34 Series 86mm 2. /4.5/7.3/8.7/10/12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 60-110VAC
NEMA34 Series 86mm 2. /4.5/7.3/8.7/10/12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 60-110VAC
US$ 39.71 ~ 43.16
2 Phase 86mm Stepper Electrical Motor
2 Phase 86mm Stepper Electrical Motor
US$ 55.46 ~ 56.23
Customers Also viewed
Chinese Manufacturer 86mm NEMA 34 Single Shaft 2-Phase 4.9A 12nm 8-Wire Digital Hybrid Stepper Motor with Electromagnetic Brake and Driver Kit
Chinese Manufacturer 86mm NEMA 34 Single Shaft 2-Phase 4.9A 12nm 8-Wire Digital Hybrid Stepper Motor with Electromagnetic Brake and Driver Kit
US$ 98 ~ 116
Electric Step Stepper Motor with Permanent Magnet Brake
Electric Step Stepper Motor with Permanent Magnet Brake
US$ 10
3phase 86mm 34CF3p150 9n. M Series Easy Servo Motor 1000/2500 Line Encoder NEMA34 Closed Loop Stepper Motor for CNC Machine
3phase 86mm 34CF3p150 9n. M Series Easy Servo Motor 1000/2500 Line Encoder NEMA34 Closed Loop Stepper Motor for CNC Machine
US$ 74.48 ~ 80.96
2 Phase Hybrid Stepper Motor Driver for NEMA 34 Stepper Motor
2 Phase Hybrid Stepper Motor Driver for NEMA 34 Stepper Motor
US$ 12
NEMA23 2 Phase DC Electric Hybrid Stepping/Stepper Motor for CNC Sewing Machine with Brake
NEMA23 2 Phase DC Electric Hybrid Stepping/Stepper Motor for CNC Sewing Machine with Brake
US$ 38 ~ 45
Product Tag:
Related categories:
Scroll to Top