Corrugated Cold Metal Rolling Forming Machine

Profile

Main parameter

1.  De-coiler: passively de-coiling
2.  Load-bearing of de-coiler: 5 T
3.  Frame of machine: welded with 350H beam steel
4.  Thickness of wallboard: 18mm
5.  Guide feeding way of forming: side direction roller type
6.  Forming machine type: wallboard and chain drive
7.  Diameter of shaft: ¢70mm
8.  Chain: 16A single row
9.  Motor power of forming machine: 5.5KW
10.  Line speed of forming machine: 10-15m/min
11. Steps of forming machine: 18
12. Roller material: superior 45# steel forging
13. Thickness of Chrome plated on roller: 0.05mm
14. Hydraulic station motor: 4 KW, pressure: 8-12Mpa
15. Hydraulic station oil pump: gear pump
16. Cutting blade material: Cr12
17. Cutting blade heat treatment: HRC58º-60
18. Rolling thickness: 0.3-0.8 mm
19. Feeding width: 1000mm
20.  Precision of cut-to-length: ±2mm
21.  Electrical control system: Computer adopts PLC (Panasonic)
22.  Voltage: 380V, 50Hz, 3 Phases.


Technological process 
Passively de-coiling → Guiding & Feeding material → Roll Forming → Cutting-to-length → Output panel


Equipment configuration
Normal manual De-coiler (5T); Main machine of roll forming; Hydraulic forming cutting; Hydraulic station; PLC computer operation cabinet; Run-out  table
 

Nude packing in 40'GP container.