Complaint
| Technical parameters of LS type spiral conveyor | ||||||||||
| type Projects | LS100 | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | LS630 | LS800 | LS1000 |
| Spiral diameter(mm) | 100 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 |
| Spiral pitch(mm) | 100 | 160 | 200 | 250 | 315 | 355 | 400 | 450 | 500 | 560 |
| Rotating speed of spiral shaft(r/min) | ≤140 | 112 | 100 | 90 | 80 | 71 | 63 | 50 | 40 | 32 |
| CYCLOIDAL pinwheel decelerator | XWO(0.55-100KW) | |||||||||
| Maximum capacity(m3/h) | 2.2 | 7 | 13 | 22 | 31 | 62 | 98 | 140 | 200 | 280 |
| Maximum conveying length(m) | ≤70 | |||||||||
| Maximum angle | ≤200 | |||||||||
| Notes | 1.Single-ended drive for C1 spiral conveyor when length less than 35m; Double-ended drive for C2 spiral conveyor qhwn length greater than 35m. 2.M1-FOR rolling bearings, can not be specified when ordering; M 2-for sliding bearings, bearing material needs to be specified when ordering(bearing materials includes copper, alloy wear-resistant, cast iron, copper-based graphite less oil lubrication pad) | |||||||||
| Technical parameters of GX spiral conveyor | |||||||
| type Projects | GX150 | GX200 | GX250 | GX300 | GX400 | GX500 | GX600 |
| Spiral diameter(mm) | 150 | 200 | 250 | 300 | 400 | 500 | 600 |
| Spiral pitch(mm) | 120 | 160 | 200 | 240 | 320 | 400 | 480 |
| Rotating speed of spiral shaft(r/min) | ≤120 | 100 | 90 | 80 | 71 | 63 | 50 |
| Motor power | Y type 0.55-100KW | ||||||
| Decelerator type | ZQ250-ZQ850 | ||||||
| Maximum capacity(m3/h) | 4.5 | 8.5 | 16.5 | 23.5 | 54 | 79 | 139 |
| Maximum conveying length(m) | ≤70 | ||||||
| Maximum angle | ≤150 | ||||||
