Complaint
Disc feeder in china is a cubage measuring feeding equipment; it supplies materials to the next procedure evenly and continuously; at the same time, it can bear relatively higher pressure. It is a fine powdery material feeder suitable for non cohesive materials like coal powder, cement, chamotte, limestone, shale, gangue and clunch. It is widely used in gold concentrator, coal mine, chemical plant, construction and foundry for quantitative and even feeding. Disc feeder is applicable for feeding powdery ore material less than 20mm.
Disk feeder for hoisting, closed. Mainly for reducing air leakage or dust system, so as to decrease the environment pollution to the minimum degree. Disc feeder main body is rotated about a vertical axis disc. There is a central disc is connected under the hopper mouth height adjustable blanking sleeve material, material from the sleeve and disc gap leakage dispersion, and scraper material from the disc scraping down. Feed amount can be changed by cutting sleeve and disc gap size and the discharge position to adjust. With the observation window, can be readily observed material feeding and running situation of the equipment.
| Model | Disc Diameter mm | Disc Rovelution rpm | Max Feeding Size mm | Feeding Capacity tph | Motor | Power kw | Weight kg |
| YG300 | 300 | 10. 0 | 20 | 0 -1. 8 | Y80L- 4 | 0. 55 | 115 |
| YG400 | 400 | 10. 7 | 20 | 0 -2. 6 | Y80L- 4 | 0. 55 | 120 |
| YG500 | 500 | 10.7 | 20 | 0-3. 3 | Y90L- 6 | 1. 1 | 124 |
| YG600 | 600 | 10. 0 | 20 | 0 -5. 0 | Y90L- 6 | 1.1 | 130 |
| YG800 | 800 | 9 | 30 | 0 -8. 0 | Y80L- 4 | 0.55 | 195 |
| YG1000 | 1000 | 9 | 30 | 0-12 | Y90L- 4 | 1. 5 | 263 |
| YG1500 | 1500 | 7 | 40 | 0-22 | Y132M2-6 | 5. 5 | 755 |
| YG2000 | 2000 | 5 | 50 | 0-80 | Y160L-6 | 11 | 2517 |
| DK600 | 600 | 7. 53 | 25 | 1. 8-3. 9 | Y90L- 6 | 1. 1 | 410 |
| DK800 | 800 | 7. 53 | 30 | 3. 5 -7. 6 | Y90L- 6 | 1.1 | 600 |
| DK1000 | 1000 | 7. 50 | 40 | 1.8-16.7 | Y100L- 6 | 1. 5 | 725 |
| DK1300 | 1300 | 6. 5 | 50 | 4. 3 -27. 9 | Y132S- 6 | 3 | 846 |
| DK1600 | 1600 | 6 | 60 | 7.03 -48.6 | Y132M1- 6 | 4 | 1980 |
| DK1800 | 1800 | 5 | 70 | 9.26 -60 | Y132M2- 6 | 5.5 | 3070 |
| DK2000 | 2000 | 5 | 80 | 13.6 -88 | Y132M2- 6 | 5.5 | 3260 |
Henan Xingyang Mining Machinery Manufactory (in the past is local state-owned enterprises ),the company located in the western of Zhengzhou city,Henan province.
Our company was founded in 1956,subsidiary company have Henan Xingyang Mining Machinery CO., LTD, Tibet Branch, Xinxiang casting plant, Xinxiang processing factory.
-Pre-sale services
Based on the clients' request and budget, we will offer equipment pictures, working site videos, plant processing diagram, assemble drawings, foundation drawings, and plant layout. Clients are welcome to visit our factory, also our equipment working site from former clients. We will arrange cars, hotels and translators for the visiting customers.
-Sale services
Our experienced technicians is available on the phone also the internet, clients can get instance guidance by telephone, email, online service anytime, anywhere. As clients' request, we will send technician to the mine site to guide the installation, trial run test, and training operators until the plant works normally.
-after-sale service.
Equipment spares will be offered with manufacturing cost in at least 10 years since the order is placed. To establish long term cooperation, we will regularly call and email our clients, to check the equipment working condition, offer suggestions for maintenance, and if necessary we will pay a visit to clients to solve the problems caused during equipment working.
