Pre-Insulated Steel Pipe Polyurethane Foam Insulation and HDPE Casing

Min.Order: 1
Product origin: Haikou, Hainan, China
Infringement complaint: complaintComplaint
US$ 50 ~ 100

Description
Product Description
steal pipe with Polyurethane foam insulation and HDPE jacket sleeve
Name Pre-insulated Pipe
structurework steel pipe/polyurethane insuation layer /HDPE outer protection pipe
the material of insuation layerpolyurethane foam
 Installation Method1.cold installation
2.Prestress Installation
3.Preheat Installation Method
4.One-Time Compensator Installation Method
 
Main Indexes of Polyurethane insulation layer 
 
indexespreference Standardunitstandard requirement
DensityCJ/T114-4.3.2kg/m3 ≥60
AverageCJ/T114-4.3.1mm≤0.5
Percentage of close areaCJ/T114-4.3.1%≥ 88
Compressive strength CJ/T114-4.3.3MPa≥ 0.3
Water AbsorptionCJ/T114-4.3.5%Immersion in boiling water 90 minute,bubble water absorption should be not more than 10%
CavityCJ/T114-4.3.1 ≤ 0.033
 
Specification of pre-insulated Pipe
 
Specifications
(mm)
steel pipe OD×Thickness
(mm)
Outer protection tube diameter ×Wall thickness
(mm)
Insulation thickness
(mm)
Unit weight
Kg/m
32/9032×2.890×2.526.53
45/11045×2.8110×2.530.04
57/12057×3.0120×2.529.06
60/12560×3.5125×3.029.57
76/14076×4.0140×3.029.09
89/16089×4.0160×3.032.511
108/180108×4.0180×3.033.013
133/200133×4.5200×3.230.317
159/250159×4.5250×3.941.622
219/315219×6.0315×4.943.139
273/365273×6.0365×5.640.449
325/420325×7.0420×7.040.567
377/500377×7.0500×7.853.781
426/560426×7.0560×8.858.294
478/600478×7.0600×8.852.2104
529/630529×7.0630×9.840.7114
529/655529×7.0655×9.853.2117
630/760630×8.0760×11.553.5158
720/850720×8.0850×12.053.0181
820/960820×10.0960×14.056.0252
920/1055920×10.01055×14.053.5281
1020/11551020×10.01155×14.053.5312
1220/13801220×12.01380×16.064.0444
1420/16021420×14.01602×16.075.0590
Advantage of the pre-insulated pipe  
1.good insulation properties
2.low heat loss
3. heat loss is 25% of the traditional pipe.
4.energy saving
5. about 30 yeas move the service life, low cost
6.has a strong waterproof and corrosive resistance and high mechanical strength
7.no attached trench ,can be directly buried in the ground or water.
 
StandardAPI 5L
GradePSL-1API 5L - Gr.B/X42/X46/X52/X60/X70 etc.
( Material)PSL-2ISO3183 - L245/L290/L320/L360/L415/L485 etc.
Minimum Order Quantity1 Ton
   Outside Diameter RangesPSL-10.405-80(in) or 10.3mm-2032mm
PSL-24 1/2 -80(in) or 114.3mm-2032mm
         Wall Thickness RangesSCH10~SCH160  Or  STD,XS,XXS  Or  1.73mm~59.54mm
LengthFor 20Ft Container4.8m-5.8m
(negotiable)For 40Ft Container4.8m-12m
       Most common choice6m, 12m
TypeWeldedERW,LSAW/SSAW
SeamlessCold Drawn,Hot Finished,Hot Expanded
Cap (negotiable)Pipe size should under DN600
Pipe EndPlain endAll sizes
Bevel endPipe size above DN50, and the thickness should greater than 3.2mm
Our advantages·Diverse products(Steel pipes, pipe fittings, other fittings)
·Any third party inspection is accepted by we company.
·Quick response in quotation,delivery,after-service.
·Focus on pipe & tube solution for project application.
Nominal size of PipeMinimum thickness of normal coating in mm
Up to DN1001.8 
Over DN100 up to DN2502.0 
Over DN250 to below DN5002.2 

The products can also be customized according to the customer's special design and requirements.


 








 

Product Tag:
Related categories:
Scroll to Top