Description
double wall corrugated roofing metal sheet machine double layer machine
Product Description
double wall corrugated roofing metal sheet machine double layer machine After normal operation for a period of time, it is necessary to stop wiping regularly and add smooth oil regularly. Before loading the chain again, clean the chain to ensure that there is no oil on the surface. In the process of adding smooth oil, wipe the excess smooth oil on the chain with a rag, and it is strictly prohibited to exceed the small closing height of the tile press.
This equipment consists of six parts, namely uncoiling, forming, cutting, receiving, PLC control and hydraulic system.
| Main Parts: |
| Manual Uncoiler | 1set |
| Feeding Guide | 1set |
| Roll Forming System | 1set |
| Hydraulic Cutting unit | 1set |
| Control system | 1set |
The first is the decoiler, which is divided into three categories - manual, electric and hydraulic. Generally speaking, if the customer has no special requirements, we generally recommend a manual decoiler as a standard configuration. Because the manual decoiler has a low cost, it is more economical and practical. The configuration is sufficient for the trapezoidal tile making machine. But if you require high-speed production and save labor costs, then we recommend that you use a hydraulic decoiler.
Next is the feed inlet. We also made a lot of improvements in this part. You can see that we have added two rows of small rubber rollers to prevent scratches on the paint surface, and also added chains or rollers on both sides, equipped with manual broaches to prevent waste Regarding the board and the hand wheel, the feeding width is adjusted. All of these as a whole ensure the flatness of our plates before forming and reduce material waste.
The molding part is generally divided into integral molding and split molding. The difference between the two is mainly in the aesthetics and price difference of the formed sheet. Split molding will increase the number of rows and rolls, so it occupies a larger area and the cost is higher, but the version will be more beautiful. Generally speaking, if our requirements for the version are not too high, overall molding is the first choice.
The next step is the cut-off part. This is generally two ways, electric and hydraulic. Electric is generally used in extreme weather, and hydraulic is more common. Hydraulic cutting has static cutting and servo tracking cutting, depending on the specific requirements. From the structure point of view, there are two forms of single guide post and double guide post. As the name implies, the stability of double guide post is stronger.
The next step is the cut-off part. This is generally two ways, electric and hydraulic. Electric is generally used in extreme weather, and hydraulic is more common. Hydraulic cutting has static cutting and servo tracking cutting, depending on the specific requirements. From the structure point of view, there are two forms of single guide post and double guide post. As the name implies, the stability of double guide post is stronger.
The hydraulic station control valve adopts large valves to prevent blockage. And it is equipped with an air-cooled system and is suitable for most areas.
Main Products
Main products: Trapezoidal (IBR) roll forming machine , Glazed tile roll forming machine, Corrugated roll forming machine, Double layer roll forming machine, Ridge cap roll forming machine, Floor deck roll forming machine, C Z purlin roll forming machine, Keel roll forming machine, Roller shutter door roll forming machine, Highway Guardrail roll forming machine, Anti-condensation length machine.
Company Profile
Complaint
