Complaint
We are manufacturers of Precision optics & Optical Components viz. Windows, Prisms, Lens, Optical coating Mirrors, Beam splitters, Filters, Band pass, Reticles, Optical flats, Cylindrical lens, Prism cement, etc. We are partners to our customers, providing high-quality solutions meeting demands. The high quality of our products and services, and the satisfaction of our customers are our ultimate objectives. These objectives are based on the benchmark of compliance with the statutory and official regulations, where different requirements exist depending on the market. We are constantly developing our products, technologies, and services in the interests of our customers and partners. In doing so, we comply with international standards in accordance with ISO 9001 for quality management. Please find below a short description of our H-K9L, N-BK7, Corning HPFS Cross Dichroic Cube Prisms ( X CUBE)
Within an optical system, many optical parts need to apply some combinative thin film layers on the substrate surface which enhance the transmission or reflection properties of the parts. The quality of the coating depends on the layers. PHYO OPTICS can apply the coating as: Anti-reflective (AR), High Reflective (HR), Partial Reflective (Beam splitter), and Filter, polarizer, and mirror coatings. With the state of art coating facilities, coating is the advantage area for the company.
We supply the following coating:
| Material | Fused Silica, N-BK7, H-K9L, Corning HPFS |
| Size Range | Traditionally as 20*20 or 25*25mm |
| Diameter Tolerance | +0.1/-0.1 to +/-0.05 |
| Angle Tolerance | +/-30sec |
| Polishing | Customerized polishing surface |
| Flatness | 2L - L/4 |
| Surface quality | 40-20 |
| Clear Aperture | 95% of the surface |
| Coating | For VIS 400-700nm |
