Description
Big Capacity Container 5gallon 20ltrs Pet Bottle Blow Moulding Making Machine
It is suitable for producing PET plastic water containers and bottles within 20L.
It is widely used to produce the carbonated beverage bottle, mineral water, pesticide bottle, oil bottle, cosmetics, ...
Due to special specification of PET resin, production of PET bottle needs two steps as follows:
STEP No. 1: Material--dehumidify--load material--injection machine --preforms
STEP No. 2: Preforms--re-heat preforms--blowing machine --stretch and blow --bottles| Model LGD-1-20L |
Bottle type specification
| Cavity | 1 |
| Max.volume | 20L |
| Bottle mouth maximum overall diameter | 38-70mm |
| Bottle biggest diameter | 350mm |
| Bottle maximum height | 550mm |
| Power specification | Light tube quantity | 48pcs |
| Light tube power | 1.5KW |
| Maximum heating power | 72KW |
| All electric machine installation | 79KW |
| Actual consumption | 30%--60% |
Air pressure specification
| Work pressure | 5-6kg/cm2 |
| Blow bottle pressure | 25-45kg/cm2 |
| Higher -pressure gas consumption | 2000~3000Ltr/min |
Air pressure specification
| Work pressure | 5-6 kg/cm2 |
| Temperature range | 10ºC |
| Consumption | 12000kcal/hr |
| Forzen water flow | 88L/min |
| Machine specification | Machine size | 5.2*2.0*2.0 |
| Machine weight | 4.6ton |
Two. Technical characters:
1. Preform is heated by the far-infrared heating tube, which make the perform
Heated equally. Furthermor, the widens and lengthen ofthe reflection board can be regulated.To fit for heating the different type of the pre-form
2. Automatic voltage stabilized and automatic perform covering system
3. Automatic alarming and breakdown detection system
4. The airway of the machine is divided into air for motion and air for blowing. Separately. In order to meet high pressure require ment for bottle making.
5. Strong locking mould force because ofthe double bent elbow and main connecting hinge.
6. The moving parts of clamping are straight slideway, which has the character of quick operation. Controller system: Taiwan DELTA Touch screen controller and PLC system. High-technology of light touch screen with accurate controlling.
generalized programming language, program update, convenient update, free maintenance, high precision, fast response.
Penumatic system: The servo motor use SMC cylinder.
Low-pressure control systems , respectively assimilating and using the professional advantage of these top brands, making the machine work more faster and improve response speed.
Installation Instructions
We supply the whole set technology for PET preform injection line and PET bottle blowing line ; you can send the technician to be train in our company.
We can send technician to go abroad and train the operators in the buyer factory, the training time is two week.
Customer service
1,After the equipment acceptance, we guarantee the quality with one year, and serve in time when need. Once equipment goes wrong, after receiving information, under the condition that there is no special things, maintenance man will respond with 48 hours.
2,Beyond the period of warranty, this company will offer technological service and customer service for life.Technical serviceInstallation and adjustmentAfter the equipments are arrived at the customer's site, the customers is responsible for unpacking and arranging the equipment according to the placement drawing; and do under our install-adjust technicians' guidance.According to requirement of water, electricity, hydraulic oil, air and the demands of quality level and pipeline, the User should connect the wire, cable and pipe of water, air and steam to the special position ordered in the installation area of production line ahead of time. Other relevant matching equipment and project should be finished before we adjust our equipment.We'll bring a suit of portable installation and adjustment tools ourselves during the period of installing and adjusting, the other instruments we need should be furnished by the customer for free including hydraulic oil, pipeline, antirust preventer etc. that needed in the installation and adjustment site.The customer should dispatch the capable person to accept training in the installing site.TrainingWe are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipments, control and operation of the equipments. The training lessons are finished in the process of installation and adjustment. Through training, users' technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time.Quality assuranceWe guarantee the goods offered are brand-new, unused, with latest design and suitable material made, and we guarantee the specification of the equipments is consonance with the contract.We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc that all belong to our responsibility.MaintenanceOffer 12 months maintenance period to the problem that caused by our design, manufacture and the material quality, and offer the relevant parts and effective service for free for above reason. We will offer a widely and favorable technical support, after service all the time after guarantee period.
Complaint
