| Product Description |
| Material | Fluorosilicone |
| Features | High Tear Strength. Good mechanical properties. Excellent solvent, oil, fuel resistance. Maintains properties over a wide temperature range. |
| Processing | Various organic peroxides will vulcanize these fluorosilicone compounds. The optimum curing procedures will depend on the process methods you use and the physical dimensions of the vulcanized product. It is usually necessary to post cure the products in air oven after molded cure. |
| Curing condition (0.6~0.8 DBPH) | Press cure 15 min @ 170ºC |
| Post cure 4 hrs @ 200ºC |
| | | | | | |
| Typical Physical Properties |
| Property | Unit | Test Method | FD9240 | FD9250 | FD9260 |
| Gravity | g/cm3 | ASTM D792 | 1.44 | 1.47 | 1.49 |
| Hardness | Shore A | ASTM D2240 | 39 | 48 | 61 |
| Tensile Strength | Mpa | ASTM D412 | 10 | 9.2 | 9.3 |
| Tear Strength | KN/M | ASTM D624-B | 38 | 40 | 38 |
| Elongation at Break | % | ASTM D412 | 560 | 500 | 350 |
| Compression Set | % | ASTM D395 | 15 | 22 | 25 |
| Volume Change, Fuel B 72hrs@25ºC | % | ASTM D471 | 24 | 23 | 22 |
| | | | | | |
| Package |
| 10 kgs per PE bag, 20 kgs per carton |
Complaint
