12t/D Soybean Palm Cotton Seeds Groundnut Oil Refining Equipment

It consisits of deacidification process, degumming process, bleaching process and deodorizing process, and also other matched items, the whole production nearly has over 30 machines.

One. Characteristic: 

The oil refining unit is batch oil refinery, which has all the functions of big & mid-size batch oil refinery, better than big&middle sized oil refining. Besides, it suits for animal oil fat & vegetable oil fat refining.
The oil refining unit is set combination, which has the characteristics of hot source preparation, electrical control, light weight and less power consumption. It is necessary for the user to prepare electricity and water supply(or 2 meter height water tank ), some coal, NaOH, phosphoric acid and bleaching earth and other material. 

Two: Process Flow

Crude oil----Refining(by adding phosphoric acid&NaOH)---Washing(by adding hot water)---Bleaching(by adding bleaching earth)-Filter(Filtrating bleaching earth)-Deodorization(by adding vacuum)-Product oil

Three: Main Equipment

Neutralization tank: used for acid refining, alkali refining or washing
Bleaching tank: used for bleaching oil&removing pigment.
Deodorizing tank: used for removing the odour of oil(made of stainless steel).
Conduction oil furnace: provide production with heat source, and the temperature can reach 280 degree.
Vacuum pump: provide vacuum degree for bleaching&deodorizing process, which can reach above 755mm Hg
Air compressor: weather bleaching earth used in the bleaching process
Filter press: filtrate the bleaching earth
Steam generator: produce steam for deodorization and distillation process

Four: Installation Preparation for 12t/d groundnut oil refining equipment

1.Electricity:Voltage 380V,Frequency 50HZ,three phase. Power is not less than 2 times of the maximum total power.
2.Water:Clean water
3.Coal:Industrial firing coal
4. Conduction oil:conduction oil (model:WRY-320). The quantity of the conduction oil:3 barrels(1T oil refining)
5.Workers:administrator 1,translator 1 (who can speak Chinese),electric welder 1,riveter 1,coupler 3-4
6.Lifting equipment one set(3T),Electric welding machine(1 set),Gas cutting(1 set),welding rod (some),tools(some).
7.Auxiliary material(see the the Auxiliary material table 1)
8.Raw material: enough raw material,the raw material can not less than the quantity for 3 days working.
9.Food &shelter(housing) for our engineer
10.Testing equipment: Equipments for acid value,moisture&colour test,280 degrees heating test.
11.Start-up plan: The start-up time, workers&safety training for workers should by prepared by your part.

Notice: In order to accomplish installation&debugging quickly for machines, the preparation mentioned above should be prepared completely to save time and cost.
We will arrange 2-4 persons for instucting the installation and trial run test onsite(in the factory of users.).