Description
MK-32A Pneumatic Sealess Steel Strapping Combination Tool for steel strapping
1. Description
MK-32A pneumatic sealless steel combination strapping tool for steel strapping and MK-32A structural principle of the same, after the band steel band consists of upper and lower punch, cuts, binding strip both ends of lap a shaped hole punch out for closure, without iron buckle, width 32mm wide strips. The machine needs to use with balancers. Widely used in logistics, chemical industry, food, daily chemical industry, wooden case strapping packing used.
2. Main Feartures
The automatic lacing, nips buckles, cuts belt one time to complete The use compressed air originates as the power, energy conservation environmental protection Does not need the steel buckle, consumes the material cost economical The working efficiency high, nips buckles the effect to be artistic May hit the 32mm wide steel strapping3. Technical Data of pneumatic steel strapping machine
| Model | MK-32A |
| Air pressure | 0.5~0.7Mpa |
| Tension force | 13KN/0.6Mpa |
| Sealing type | concave and convex buckle |
| Net weight | 24KG |
| Strapping speed | 5.5m/min |
| Strapping material | Steel strapping |
| Applicable strapping width | 32mm |
| Applicable strapping thickness | 0.8~1.0mm |
4.Packing MethodStep 1
Left hand grip steel tape from the top of the loop will be bound by the packaging, end head back pressure in the steel belt directly below
Step 2
The right thumb press handle and four fingers lift to separate the tensioning machine from the base. the steel belt stack is inserted 20-30mm in front of the upper and lower punch by the left hand, the steel belt is pressed on the washer by the tensioning wheelStep 3Press the lower motor to start the switch L by right thumb finger, tighten the rotation arm of the wheel to tighten the steel belt until it stops. At this time, the superimposed steel belt is locked by the gasketStep 4Press the cut-off switch S with the right thumb, and the punch cutting knife moves out of the seal and cuts out the excess steel belt. At this time, the left hand should hold the cut steel beltStep 5Press the handle with the right thumb, and hold the outer shell of the wind motor with four fingers. The resultant force separates the tension wheel from the base5.Detail Pictures:6.Company InformationQingdao Ausense Packing Equipment Co.,Ltd is established in 2001. Professionally specialized for the planning of complete end-of-line packaging equipment, R & D and manufacturing. After years of practice, now Ausense has automatic box and bag packing, sealing, shrinking, vacuum,strapping, palletizing, wrapping, transportation and other 10 series that are over 60 varieties of packaging equipments. Company rely on the automation industry chain advantages, the integration of technology research and development, design, production, in conjunction with the customer site applications, providing customers with intelligent, flexible, one-stop information technology automated packaging solutions
Complaint
