Description
Product name:
Vanparts ratche buckles-gull-wing van parts lashing ring f_track forged eye bolt and eye nut eye bolts ball joints side board panel hinge
A-track, e-track, f-track
1) made of steel or aluminum.
2) according to the holes shape, there are a-track, e-track, f-track, o track, keyhole track, eo track etc.
3) according to the track use direction, there are horizontal and vertical types.
4) use with track fittings to lashing or secure the products.
5) easy installation and removal
6) different lengths are available or special produce according to customer request.
7) used in van trailers or containers etc.
Features of locking gear:
1) product information: We mainly manufacture many kinds of different lcoking gear
2 materials: Carbon steel, iron, stainless steel, aluminum.
3 surface treatment: Zinc plated, polished, raw, anodized.
4 custom products are welcomed.
5) different dimensions available.
6) used in truck, trailer.
Various types of tracks
1) made of steel or aluminum
2) according to the holes shape, there are a-track, e-track, f-track, o
Track, keyhole track, eo track etc.
3) according to the track use direction, there are horizontal and vertical
Types.
4) use with track fittings to lashing or secure the products.
5) easy installation and removal
6) different lengths are available or special produce according to customer
Request
7) used in van trailers or containers etc.
Brass machining parts\precision machining parts\CNC parts/CNC machining parts/CNC machined parts/CNC precision parts/CNC precision components/aluminum parts/stainless steel parts/metal parts/precision CNC parts casting auto parts -casted auto parts- auto brake disc exhaust manifold/cylinder cap/sand casting parts machining
Place of origin: Ningbo, China
Lead time: 20-30
FOB port: Ningbo
Features:
Specifications
Ms-20257 specification/supersedes an-257
A) complete hinges are furnished with a pin of the same length.
B) second dash number indicates length(l) expressed in inches and hundredths not exceeding stock length of table. End loops and /or tangs must never exceed a full loop or tang, and both ends must meet equal within. 020 inch.
C) tolerance shall be + -. 008 on each dimension for f, 2f, 3f, etc. And shall not be cumulative.
D) types x and y half hinges can be made from type h half hinge but will not be stocked or procured by service activities.
Material
Aluminum alloy, 5052, h24 or h34 per QQ-a-250/8. Corrosion resistant steel per QQ-s-766, type 301, 302, or 304.
Finish
Aluminum alloy, anodized, mil-a-8625t, type ii or none depending on coding. Corrosion resistant steel, none.
Remove all burrs and sharp edges. Dimensions in inches, unless otherwise specified, tolerances: Decimals + -. 010, angles + - 1/2 degrees. Add h, x, or y before first dash number for half hinge without pin.
Width:
The overall dimension of a hinge edge to edge, opened to flat position, across the knuckle. Leaf width is measured from the center of the pin to the outer edge of the leaf.
Hinges
· Door locks
· Handle/door holder
· Cable clamp
· Paddle lock
· Vanparts
· Cargo bar/track
· Buckles/hook
· Lashing rings
· Ratchet
· Aluminum
· Seal
· Roller
· Vehicle accessory
· Folding step
· Bumper
· Gull-wing van parts
· Lights
· Corner castings
· Refrigerator van parts
Specially designed leaves for welding installation. All come with a bushing between the two leaves.
The weld on hinge can also be customized to meet your unique specifications.
CNC machining
Machining size up to 800X600X400mm
Processing Scope
CNC turning, milling, drilling and punching
Products
Description
1. CNC turning, milling, drilling, tapping processing, CNC precision machining service
2. Material: Carbon steel, Steel alloy, stainless steel, aluminum, brass, bronze, plastic (PVC, POM etc. )
3. Surface treatment: Zinc plated, chrome/nickel plated, phosphating, heat treatment etc
4. Leading time: 10-35 working days depending on order quantity.
5. The products showing here are only for reference not for sale.
Inspection
All our intermediate manufacturing processes are routinely inspected by qualified QA Operators. All dimensional aspects of the finished part are checked for conformance.
Advantage
1. Our company is specializing in supplying OEM machining service in accordance with customers' drawing and requirement with low price but good quality and service.
2. Drawing Software: Solidworks, Pro/E, AutoCAD CAM |
Complaint
