Automatic Glass Drilling Machine for Shower Door Glass Tempering Glass

I.Description

1.The Z axis feeding adopt oil pressure buffer technology, drilling quality is stable;
2.All welding parts are processed after annealing treatment, and the outer sliding sleeve is made of ductile iron. 3.The inner sliding sleeve is plated with hard chromium and then work with the outer sliding sleeve. The whole bit 4.assembly has high precision and long service life;
5.The lower drill bit work automatically, the upper drill bit has auto mode and manual mode. With excellent processing performance;
6.The machine can provide manual hole positioning, infrared positioning, mechanical positioning; Various positioning modes facilitate the batch production and bulk production;
7.This item is PLC control and it can provide single cycle working mode and continuous cycle working mode, under the two working modes, factory piecework can be achieve;
8.The application of foot switch can free the hands; it's convenient to processing large glass;
Special working light for good visibility;
9.Infrared positioing method;

II. Technical parameters

The drilling depth of Y axis	1250mm
The max. glass size	2400*3500mm
The min. glass size	300*300mm
Glass thickness	3-30mm
Hole diameter	Dia.4 - 80mm
The max. feeding distance of Z axis	40mm
The height of table	900±50mm
The overall dimension	2380*2200*1700mm
Power supply	Voltage	380V, 50Hz
	Watt	2.45 KW
Air pressure	Connection	Dia.8mm air pipe
	Pressure	0.6 Mpa
	Water flow	18 m³/ hour
Lubricant	20#
Water source	Connection	Dia. 10mm water pipe
	Pressure	≥0.3 Mpa
Enviroment temperature	6-40 ºC