Description
Mixing Mill,Two Roll Rubber, Plastic Open Mixing Mill
1) The roll adopts the vanadium titanium metal alloy chilled cast iron and its surface is hard and wear-proof. The internal cavity is processed to make temperature well proportioned on the roll surface.
2) The machine is equipped with an overload protection device to prevent the main components from being damaged.
3) The machine is also equipped with an emergency brake device. When an emergent arises, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.
4) The transmission system adopts a hardened tooth-surface reducer, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5) The base frame is a whole framework, which is convenient for installation.
6) Stock blender for direct rubber sheet and knife to cut as your need to assemble.
7) Auto-lubrication system for greese or oil and match bearing bush
Open Type Two Roll Mixing Mill with CE
1. The mixing mill is made of LTG-H alloy chilled cast iron
2. The open mixing mill speed reducing machine adopts hard tooth, its running noise is low and owns long life. This mixing mill adopts a special design of refining seal structure so that it can eliminate the leakage of lubricating oil.
3. Our Company specially designed the human-orientated machine, such as block rubber board and turbine tapping rubber device of open mixing mill can be used steam style; Open mixing mill operating system design in nearby working areas etc.
4. This mixing mill can be equipped with hydraulic or mechanical device which can automatically make the rubber material be mixed over and over again, so the labor intensity and mixing time can be reduced greatly.
5. The roll nip of the mixing mill can be adjusted by using manual or electrical mode
6. To ensure the safety of staff and equipment, we install convenient button for emergency.
7. All the mixing mills we provide to you are checked through 8 hours non-stop full load operation, customers can use them immediately after installation.
Mixing Mill,Two Roll Rubber, Plastic Open Mixing Mill
| Item | XK-160 | XK-250 | XK-360 | XK-400 | XK-450 | XK-550 | XK-560 | XK-660 | XK-710 |
Roll diameter | mm | 160 | 250 | 360 | 400 | 450 | 550 | 560-510 | 660 | 710 |
Roll working length | | 320 | 620 | 900 | 1000 | 1200 | 1500 | 1530 | 2130 | 2200 |
Front roll linear speed | r/min | 9 | 16.3 | 16.7 | 19.3 | 21.8 | 22.5 | 27.2 | 28 | 31.9 |
Speed ratio of rolls | | 01: 01.4 | 01: 01.1 | 01: 01.3 | 01: 01.3 | 01: 01.3 | 01: 01.2 | 01: 01.2 | 01: 01.2 | 01: 01.5 |
Max roll space | mm | 4.5 | 8 | 10 | 10 | 12 | 16 | 15 | 0.5-15 | 0.5-15 |
Compound feeding capacity | kg | 1-2 | 10-15 | 20-25 | 18-35 | 50 | 50-65 | 50-65 | 165 | 190 |
Motor power | kW | 5.5 | 18.5 | 30 | 45 | 55 | 110 | 90 | 240 | 280 |
Dimensions(L× W× H) | | | | | | | | | | |
L | mm | 1133 | 2722 | 4200 | 4920 | 5405 | 6646 | 6270 | 7280 | 8185 |
W | mm | 920 | 1115 | 1780 | 1780 | 1740 | 2736 | 2282 | 3400 | 3910 |
H | mm | 1394 | 1345 | 1760 | 1800 | 1790 | 2105 | 2000 | 2530 | 2270 |
Gross weight | T | ~2 | ~3.2 | ~6.5 | ~8 | ~11.4 | ~22 | ~22.5 | ~49 | ~51 |