Ceramic Coated Shaft Sleeve for Slurry Pumps Description
| Part Name | Slurry Pump Shaft Sleeve |
| Part No. | B075,C075,CAM076,CH076,D075,DAM076,E075,E076,EAM075,EAM076 |
| Material | 3cr13,4Cr13,SS304,SS316,SS316L,Ceramic coated J04,J05,CD4MCu etc. |
| Application | Applied to machinery equipments: cone crusher,textile machinery,mining machinery,engineering machinery,metallurgical machinery,cement machinery,chemical machinery,construction machinery,coal machinery etc. |
| Customized | Can be customized/ do OEM service as your drawing. |
| Main Production Processes | Sand casting,Metal Mold casting and Centrifugal Casting. |
Ceramic coatings Shaft Sleeve.
We are a leader in ceramic coatings that provide superior protection from abrasion,corrosion and chemical attack to metal and concrete surfaces.
With Industries facing adverse environmental conditions that attack components and structures,resulting in compromised plant reliability,reduced safety and lost profits,protective coatings is a significant necessity.
Our high performance epoxy coatings and ceramic coatings provide you with long-term protection from abrasion and corrosion,Our abrasion and corrosion control not only simplifies your maintenance procedures,but also reduces your downtime.
Other Pump SparesExcept the shaft sleeves, we also produce slurry pumps spares such as Cover Plate,Frame Plate,Impeller,Volute,Frame Plate Liner,Cover Plate Liner,Frame Plate Liner Insert,Shaft Sleeve,Locating Sleeve,Stuffing Box etc.
Except the standard parts, we also produce non-standard parts if you supply us drawing or samples.
Also do special materials, Polyurethane pump parts ,Ceramic coated parts,hastelloy parts etc.
| Basic Part No. | Material Code | Part Name |
| 001 | E62 | Adjusting Screw |
| 003 | G01 | Base |
| 005 | | Bearing Assembly |
| 011 | E62 | Clamp Washer |
| 013 | D20 | Cover Plate |
| 015 | E62 | Cover Plate Bolt |
| 017 | R26A | Cover Plate Liner |
| 018 | R26A | Cover Plate Liner (Half) |
| 024 | E62 | End Cover |
| 028 | G01 | Expeller |
| 029 | G01 | Expeller Ring |
| 029R | R08A | Expeller Ring (Rubber) |
| 032 | D20 | Frame Plate |
| 034 | E62 | Frame Plate Bolt |
| 036 | R26A | Frame Plate Liner |
| 039 | E63 | Frame Plate Stud |
| 041 | A05A,R26A | Frame Plate Liner Insert |
| 043 | R26A | Frame Plate Liner (Half) |
| 044 | K24 | Gland Assembly |
| 060 | R08A | Intake Joint |
| 062 | D70 | Labyrinth |
| 063 | K31 | Lantern Ring |
| 064 | S18 | Impeller O-Ring |
| 067 | E62 | Neck Ring |
| 070 | E05 | Shaft Key |
| 073 | E05 | Shaft |
| 075 | D20 | Shaft Sleeve |
| 076 | D20 | Shaft Sleeve (Long) |
| 078 | G01 | Stuffing Box |
| 081 | E02 | Keeper Plate |
| 083 | A05A,R26A | Throat Bush |
| 085 | E02 | Cotter |
| 090 | S10 | Lip Seal |
| 109 | S18 | Shaft O-Ring |
| 110 | A05A | Volute Liner |
| 111 | Q05 | Packing |
| 117 | E62 | Shaft Spacer |
| 118 | K31 | Lantern Restrictor |
| 118-1 | K24 | Lantern Restrictor(Low Flow) |
| 122 | R11A | Expeller Ring/Stuffing Box Seal |
| 124 | R08A | Volute Liner Seal |
| 125 | R08A | Volute Frame Seal |
| 132 | R08A | Discharge Joint Ring |
| 138 | E62 | Grease Cup Adaptor |
| 179 | C23 | Shaft Sleeve Spacer |
| 210 | S46 | Shaft O-Ring |
| 217 | S18 | Impeller O-Ring |
| 239 | C23 | Impeller Release Collar |
| 241 | K24 | Lip Seal Gland |
| 302 | E02 | Lifting Tube |
| 303 | E02 | Locating Nut |
| 304 | E02 | Volute Lifting Beam |
| 306 | E02 | Shaft Wrench |
| 310 | E02 | Stuffing Box / Expeller Ring |
| 425 | R08A | Dyna Seal |
| 430 | U14 | Nut Covers |
| 005 | | Bearing Assembly |
| 019 | E02 | Mounting Plate |
| 041 | A05A | Back Liner |
| 064 | S18 | Impeller O-Ring |
| 070 | E05 | Shaft Key |
| 092 | A05A | Casing |
| 102 | E02 | Column |
| 116-1 | R10A | Strainer - Upper (Rubber) |
| 116-2 | G01 | Strainer-Upper (Cast Iron) |
| 116-3 | U02A | Strainer-Upper(Urethane) |
| 116-4 | C23 | Strainer-Upper(SS Mesh) |
| 116L | U01A | Strainer-Lower |
| 125 | R08A | Back Liner Seal |
| 154 | E02 | Discharge Pipe |
| 204 | R00 | Discharge Pipe Gasket |
| 231 | E02 | Suction Pipe |
| 290 | E02 | Spacer |
| 293 | E02 | Discharge Pipe Support |
| 306 | E02 | Shaft Wrench |
| 430 | U04A | Nut Covers |
| 005 | | Bearing Assembly |
| 019 | | Mounting Plate |
| 041 | | Back Liner |
| 064 | | Impeller O Ring |
| 070 | | Shaft Key |
| 092 | | Casing |
| 102 | | Column |
| 116 | | Strainer-Upper |
| 116L | | Strainer-Lower |
| 153 | | Column Clamp |
| 154 | | Discharge Pipe |
| 290 | | Spacer |
| 291 | | Socket Head Protectors |
| 293 | | Discharge Pipe Support |
| 306 | | Shaft Wrench |
| 421 | | U-Bolt |
Naipu Workshop We have Mould workshop, casting workshop,machining workshop,assembly workshop,testing workshop,packing workshop etc, one dragon service.
Naipu Advanced Inspection FacilitiesWe have established a strict QA and QC system,we can provide quality control records such as "Spectrum Detection" "Metallographic Microscope Inspection" "Block Test" "Ultrasonic Flaw Detection" " Penetration Testing"etc. And related test reports to our clients if necessary, such as " Material Test Report " " Dimensional Test Report " " Rotor Balancing Test Report " " NDT Test Report " " Hardness Inspection Report " etc. Contact Us
SHIJIAZHUANG NAIPU PUMP CO.,LTD
Contact Person: Karen Tan
Complaint
