Description
ST-1~20 Torque Meter
I. Brief Introduction:
ST Series Digital Torque Meter is R&D for testing and measuring many kinds of torque. The Meter is applied with the measured and calibrated torque of motorize or air-driving clamps, torque screwdriver and torque spanner. It is applied with the test of wrench force, wrest fractured force. The gauge is used in Electric industry, Light industry, Machinery manufacture, Scientific research, and so on.
II. Product Trait:
1. Peak holding and auto-releasing function: Catching and holding the peak value in test, the peak holding time can be set(1-10 seconds);
2. Automatic power off function: This function saves battery and keeps the gauge safe, also the power off time(1-60minutes) can be set By yourself;
3. Comparing function: Initial input of the tolerance limit(Max/Min)enables the device to judge the measured result as Go(Green pilot lamp)/NG(Red pilot lamp);
4. Memory function: Memory 10 testing data, and calculate the average;
5. Three units conversion: Converting three units(N. M, kgf. Cm, ibf. In) automatically;
6. RS-232C output: Connecting outside equipment and using the related CD for transmitting the tested data to computer for relevant treatment.
III. Product Specification
Model
ST-1
ST-2
ST-5
ST-10
ST-20
Capacity
1N. m
2N. m
5N. m
10N. m
20N. m
Load Resolution
0.0005N. m
0.001 N. m
0.002 N. m
0.005 N. m
0.01 N. m
Sensor Conformation
Sensor Inside
Accuracy
± 0.5%FS
Testing speed
≤ 5000rpm
Power
8.4V 1.2V*7 Nickel Hydride battery
Charging time
About 4 hours
Battery operating time
About 40 hours
Waiting time
About 3 months
Battery life
≥ 300times
Adaptor
Input: AC 220V 300mA; Output: DC 12V 300mA
Weight
About 2.4kg
Complaint
