Pneumatic Transport Educational Equipment Fluids Engineering Experiment Equipment Educational Lab Equipment

SR3215 Pneumatic Transport Educational Equipment Fluids Engineering Experiment Equipment educational lab equipment


 

• 1. Product Overview
  1.1 Product Introduction
  The pneumatic conveying device can be used to convey the dispersed solids in the pipeline.
  The solids are transported to an air flow feed tank through a vibrating tank, and the air flow transports the solids to the pipe, and the transportation in the collection tank is terminated.
  Depending on the speed of the air flow and the solids content, different transport conditions may occur. At high speeds, the solids are dispersed in a tube of uniform cross-section (dilute phase transport). If the speed is reduced, the solid particles will slide down due to their higher settling speed. The particles disintegrate again in the air flow and reduce the speed, reducing the settling speed of the individual particles, which eventually leads to blockage and transportation. Through the transparent tube, different transportation states can be observed.
  To determine the pressure loss and flow rate, the measurement point is set at the relevant location. The air speed is adjusted by a pressure regulator. The flow of solid particles can be adjusted by the vibration feed controller. Compressed air must be provided from the laboratory.
  1.2 Features
  The main body of the experimental device is built with high-strength industrial aluminum profiles, and a universal wheel with brake is installed at the bottom to facilitate movement and fixation. The pipeline is made of transparent material, which is convenient for observing the trajectory of solid particles.
  1.3 Performance parameters
  Vertical tube
  Height: 2m
  Diameter: 50mm
  Feeding barrel volume: 12L
  Receiving barrel volume: 38L
  Compressed air: minimum 2bar and 60m³ / hour
  Power supply: AC220V 10A
  1.4 practical training items that can be completed
  Operation of pneumatic conveying system
  Observation of different transportation states
  Measurement of air velocity
  2. Experimental content
  2.1 Operation experiment of gas delivery system
  2.2 Observation experiment of different transportation states
  2.3 Measurement of air velocity
  2.4 Solid particle feeding speed experiment

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.

Photo for Clients Visiting Factory



 

Photo for Workshop and Equipments




 

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate

Our products takes ISO9001 product management system.