1. FOOD GRADE CMC
| TYPE | Viscosity (mPa.s) | PH Value | Degree of Substitution | Chloride (Cl-% | Loss on Drying % | Sieving Rate(%)(80 mesh) |
| Min. | Max. | Soln.(%) | Min. | Max. | Min. | Max. |
| DE9 | 110 | 144 | 2 | 6.5 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DE9-1 | 550 | 1350 | 2 | 6.5 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DE9-2 | 1650 | 2250 | 2 | 6.5 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DE9 | 330 | 450 | 1 | 6.5 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEH9-1 | 660 | 900 | 1 | 6.0 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEH9-2 | 1100 | 1350 | 1 | 6.0 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEH9-3 | 1870 | 1980 | 1 | 6.0 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEH9-4 | 2200 | 2250 | 1 | 6.0 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| FVH9-5 | 2750 | 3150 | 1 | 6.0 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEH9-6 | 2850 | 4500 | 1 | 6.0 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEM6 | 1100 | 1800 | 1 | 6.5 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
| DEFH6 | 330 | 450 | 1 | 6.5 | 8.5 | 0.95 | / | ≤1.2 | ≤9 | ≤98.0 |
Used as additive in food field, CMChas the functions of thckening, suspending, emulsifying, stabilizing, shaping, filming, bulking, anti-corresion, retainning freshness, acid-resisting, health protcting, etc. It can replace the application of guar gum, gelatin, agar, sodium alginate, and pectin, It is widely used in modern food industry, such as frozen food, solid drink, fruit juice, jam, lactic acid drinks, condiment, biscuit, instant noodles, bakery products, meet products, etc.
Our food grade CMC has good tickening property, water retention, dispersion stability, filming and chemical stability. It has high viscosity even in low concentration, and makes the food tatse delicate and smooth; it can reduce the syneresis of food and extend the shelf life, it can control the crystal sizein frozen food and prevent the stratification between oil and water; in acid system, our anti/acid products have good suspending stability, so it can improve the stability of milk and the impedance ability of protein;, our CMC can be used together with other stabilizers and emulsifiers to complement each other, strengthen each other's effect and reduce and cost.
2. CERAMIC GRADE CMC| TYPE | Viscosity (mPa.s) | PH Value | Degree of Substitution | Loss on Drying % |
| Min. | Max. | Soln.(%) | Min. | Max. | Min. | Max. |
| DE9 | 330 | 450 | 1 | 6.5 | 8.5 | 0.90 | / | ≤9 |
| DEH9-1 | 660 | 900 | 1 | 6.0 | 8.5 | 0.90 | / | ≤9 |
| DE1002 | 330 | 450 | 1 | 6.5 | 8.5 | 0.98 | / | ≤9 |
| DE1592 | 660 | 810 | 1 | 6.5 | 8.5 | 0.90 | / | ≤9 |
| DE0492 | 440 | 810 | 2 | 6.5 | 8.5 | 0.90 | / | ≤9 |
| DE1583 | 715 | 900 | 1 | 6.5 | 8.5 | 0.80 | / | ≤9 |
| DE1074 | 880 | 1170 | 1 | 6.5 | 9.0 | 0.70 | 0.8 | ≤9 |
| DE0692 | 935 | 1800 | 2 | 6.5 | 8.5 | 0.90 | / | ≤9 |
| DE0464 | 1100 | 2700 | 2 | 6.5 | 10.0 | / | / | ≤9 |
| DE2081R | 1980 | 2070 | 1 | 6.0 | 8.5 | 0.83 | 0.9 | ≤9 |
| DE3081R | 2530 | 2700 | 1 | 6.0 | 8.5 | 0.83 | 0.9 | ≤9 |
| DEH7 | 990 | / | 1 | 6.5 | 9.0 | 0.68 | / | ≤9 |
| DEH8 | 385 | 540 | 1 | 6.5 | 9.0 | 0.80 | 0.9 | ≤9 |
| DEVH8 | 880 | 1170 | 1 | 6.5 | 9.0 | 0.78 | 0.9 | ≤9 |
| OM6 | 440 | 540 | 2 | 7.0 | 10.5 | / | / | ≤9 |
| C1215 | 1320 | 1350 | 1 | 6.5 | 8.5 | 0.90 | / | ≤9 |
| P600 | 550 | 650 | 2 | / | / | / | / | / |
| P800 | 750 | 900 | 2 | / | / | / | / | / |
CMC can be used in ceramic body, glazing pulp, and decoration, Used in ceramic body, it is a good strengthening agent, which can strengthen the mouldability of mud and sand materials, help the shaping of the base and increase the folding strength of the green body. Used in glazing pulp and decoration, it is a binder that plays a role of suspending, uncoagulating, and keeping water.
3. PETROLEUM DRILLING GRADE PAC& CMC
A. Polyanionic Cellulose (PAC)| Technical Specifications of PAC for Drilling Fluid | | | | | |
| TYPE | Viscosity (mPa.s) | Filtration (ml) | PH Value | Degree of Substitution | Loss on Drying % | Puirity (%) |
| Min. | Max. | Soln.(%) | | Min. | Max. | Min. | Max. |
| DEL9 | 110 | 144 | 2 | | 6.5 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEM9-1 | 550 | 1350 | 2 | | 6.5 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEM9-2 | 1650 | 2250 | 2 | | 6.5 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEH9 | 330 | 450 | 1 | | 6.5 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEVH9-1 | 660 | 900 | 1 | | 6.0 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEVH9-2 | 1100 | 1350 | 1 | | 6.0 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEVH9-3 | 1870 | 1980 | 1 | | 6.0 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEVH9-4 | 2200 | 2250 | 1 | | 6.0 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEVH9-5 | 2750 | 3150 | 1 | | 6.0 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEVH9-6 | 2850 | 4500 | 1 | | 6.0 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEM6 | 1100 | 1800 | 1 | | 6.5 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
| DEFH6 | 330 | 450 | 1 | | 6.5 | 8.5 | 0.95 | / | ≤9 | ≤98.0 |
PAC & CMC can be used in drilling fluid, fixing fluid and fracturing fluid. In drilling fluid, it works as viscosifier, filtration reducer, and rheology controller; in fixing fluid, it is used to control fluid viscosity, suspend heavy objects, and avoid fluid loss; in fracturing fluid, it is used to carry stuffing and avoid fluid loss.
B. sodium Carboxymethyl Cellulose (CMC)| Technical Specifications of HV-CMC, LV-CMC | | | |
| Specifications | Performance Test |
| Items | Indicators |
| In distilled water | In salt water | In saturated water |
| Base Mud | Filtration (ml) | 60±10 | 60±11 | 60±12 |
| Apparent Viscosity (CPS) | ≤6 | ≤6 | ≤6 |
| PH Value | 8.0±1.0 | 8.0±1.0 | 7.5±1.0 |
| HV-CMC | Yield of 15CPS (m3/t) | ≥160 | ≥130 | ≥140 |
| LV-CMC | Filtration: 10ml/h | Addition (g/l) | / | ≤7.0 | ≤10 |
| Apparent Viscosity (CPS) | / | ≥4 | ≤6 |
| Remarks | The performance test of HV-CMC as per OCMA DFCP-7 methods. |
| The performance test of LV-CMC as per OCMA DFCP-2 methods. |
| Technical Specifications of CMC-HVT, CMC-LVT | | |
| Type | Viscometer dial reading at 600r/min | Filtration (ml) |
| | In distilled water | In 40/L salt water | In saturated salt water | In Filtration (ml) |
| CMC-HVT | ≥30 | ≥30 | ≥30 | ≤10 |
| CMC-LVT | ≤90 | ≤10 |
| Remarks | Conforms to API Spec. 13A test methods |
| Technical Speifications of CMC for Fracturing Fluid | | | | |
| Type | Vicosity (mPa.s) | PH Value | Degree of Substitution | Loss on Drying(%) | Purity(%) |
| Min. | Max. | Soln.(%) | Min. | Max. | Min. | Max. | |
| CMC9-5000 | 5000 | 6000 | 1 | 6.5 | 9 | 0.90 | / | ≤10 | ≥90 |
| CMC9-6000 | 6000 | 7000 | 1 | 6.5 | 9 | 0.90 | / | ≤10 | ≥90 |
| CMC9-7000 | 7000 | 8000 | 1 | 6.5 | 9 | 0.90 | / | ≤10 | ≥90 |
4. PAPER MAKING GRADE CMC| Type | Viscosity (mPa.s) | pH Value | Degreee of Substitution | Purity(%) | Loss on Drying % |
| Min. | Max. | Soln.(%) | Spindle No. | Speed (rpm) | Min. | Max. | Min. | Max. |
| DE-5 | 5 | 10 | 2 | 1 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | As per customer's requirements (≥95or≥98) | ≤10 |
| DE-10 | 5000 | 7000 | 2 | 1 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | ≤10 |
| DE-30 | 7000 | / | 2 | 1 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | ≤10 |
| DE-50 | 100 | 250 | 2 | 1 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | ≤10 |
| DE-200 | 5000 | 7000 | 2 | 2 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | ≤10 |
| DE-600 | 200 | 400 | 2 | 2 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | ≤10 |
| PM | 300 | 500 | 2 | 2 | 60 | 6.0 | 8.5 | 0.65 | 0.85 | ≤12 |
| PAC-20 | / | 100 | 4 | 2 | 60 | 6.5 | 8.5 | 0.8 | 0.85 | ≥98 | ≤8 |
| DEX-5 | 33 | 90 | 4 | 1 | 60 | 6 | 8.5 | 0.8 | 0.9 | ≥98 | ≤8 |
| DEX-10 | 110 | 180 | 4 | 2 | 60 | 6 | 8.5 | 0.8 | 0.9 | ≥98 | ≤8 |
| DEM8-1 | 550 | 1170 | 2 | 2 or 3 | 60 | 6 | 8.5 | 0.7 | 0.9 | ≥98 | ≤8 |
In paper making industry, CMC is used to make the paint for coated pater, as additive in wet-end and sizing agent for surface. We have different paper making grades of CMC products to satisfy different customers' requirements.
5. MINING GRADE CMC| Type | Viscosity (mPa.s) | pH Value | Degreee of Substitution | Purity(%) | Degree of Loss on Drying % |
| Min. | Max. | Soln.(%) | Min. | Max. | Min. | Max. |
| DE16 | 100 | 250 | 2 | 6.0 | 10 | ¥0.70 | 0.8 | / | ≤10 |
| OH6 | 5000 | 7000 | 2 | 6.0 | 10 | ¥0.70 | 0.8 | / | ≤10 |
| OVH6 | 7000 | / | 2 | 6.0 | 10 | ¥0.70 | 0.8 | / | ≤10 |
| DEV9 | 100 | 250 | 2 | 6.0 | 10 | ¥0.85 | / | / | ≤10 |
| DE9 | 5000 | 7000 | 2 | 6.0 | 10 | ¥0.85 | / | / | ≤10 |
| DE6-A | 200 | 400 | 2 | 6.0 | 8.5 | ¥0.70 | 0.8 | ≥98 | ≤10 |
CMC is used in mining industry as pallet binder and floating selection inhibitor. CMC is a component of the binder for mineral dust shaping, and the binder is an indispensable ingredient in pallet forming. It can improve the character of wet pellet. CMC is adjusting agent in floating selection process, it is used as silicate gangue inhibitor, controlling the lead in copper and lead separating, sometimes, it is used as dispersant for mineral mud.
6. OHTER GRADE| Technical Specifications of Other Industrial Grade CMC | | | | |
| Type | Viscosity (mPa.s) | PH Value | Degree of Subsftitution | Loss on Dring % |
| Min. | Max. | Soln.(%) | Viscometer | Min. | Max. | Min. | Max. |
| DE6 | 300 | 800 | 2 | NDJ-79 | 6 | 9 | 0.6 | 0.85 | ≤10 |
| DE6 | 800 | 1200 | 2 | NDJ-79 | 6 | 9 | 0.6 | 0.85 | ≤10 |
| DEC6 | 1200 | / | 2 | NDJ-79 | 6 | 9 | 0.65 | 0.85 | ≤10 |
| DEC-S | 1200 | / | 2 | NDJ-79 | 6 | 8.5 | 0.65 | 0.85 | ≤10 |
The Specifications Sheet for Industry Grade (used in textile, printing and dye, detergent, paint, toothpaste, pharmaceutical, glue and adhesive, welding, battery, construction materials, tobacco, mosquito-repellent incense. etc)
Packaging & Delivery
1.Paper Bag: 850*450*100(mm) and 25kg net;
2.Carton: 570*380*220(mm) and 25kgs net ;
3.Drum: 470*370(mm) and 25kgs net.
Special package can be provided as per customers' requirements.
OUR COMPANY
Qingdao Doeast Chemical Co., Ltd. Is one leading manufacturer specializes in production and sales of CMC. Its products covers a range of food additives, drilling fluids for Oil and Gas Wells, and General Utility Chemicals. The products have been used by many top companies in China and USA, Russia, north Africa, etc, earned reputations from our customers.
OUR SERVICE
Our Company is armed with advanced manufacturing equipment, automatic assembly line and inspection/testing devices. The company adheres to the business principle of "technology for development and quality for existence", and provides customers with quality products and considerate service based on its years of experience in R&D, production and management, great technical strength and the mature quality management system
Our team works with the clients on their specific requirements and chemicals specifications. We have extensive experience and expertise to handle and execute all aspects of xanthan gum. Our experience guarantees the customer with high quality, cost effective, prompt and professional supplies and services.
RFQ
1.What's your payment terms?
Usually T/T or LC.
2. What's your delivery time?
Usually our delivery time is 10 days.
3. How about the packing?
We provide the packing as 25 kg / bag or carton with PE inner bag or other packings as your require.
4.How about the validity of the products?
According to the products you ordered.
5.What is your supply ability?
Food grade xanthan:10000mt per year
Oil grade xanthan: 20000mt per year
Industry grade and Pharm grade: 5000mt per year
6. What documents you provide?
Usually, we provide Commerical Invoice, Packing List, Bill of loading, COA , Health certificate and Original certificate. If your markets have any special requirements, let us know.
7. What is loading port?
Usually is Tianjin or Qingdao.
LOOK FORWARD TO YOUR INQUIRY!
Complaint
