Diameter(mm) | length(mm) |
7 | 200 |
8 | 200 |
12 | 200 |
15 | 400 |
20 | 400 |
21 | 70 |
23 | 70 |
25 | 200 |
26 | 70 |
35 | 70 |
42 | 70 |
50 | 70 |
55 | 70 |
62 | 70 |
70 | 70 |
71.5 | 70 |
85 | 32 |
90 | 60 |
95 | 32 |
160 | 50 |
Outter diameter(mm) | inner diameter(mm) | length (mm) |
22 | 10 | 7 |
32 | 19 | 90 |
34 | 16 | 70 |
38 | 18 | 70 |
43 | 8 | 70 |
43 | 23 | 50 |
47 | 18 | 32 |
48 | 16 | 70 |
48 | 17 | 70 |
48 | 28 | 70 |
50 | 8 | 70 |
50 | 28 | 70 |
59 | 35 | 70 |
60 | 25 | 70 |
62 | 23 | 70 |
62 | 38 | 70 |
64 | 38 | 70 |
65 | 30 | 70 |
67 | 35 | 70 |
70 | 8 | 70 |
70 | 50 | 70 |
86 | 48 | 70 |
96 | 63 | 70 |
118 | 83 | 70 |
118 | 100 | 70 |
134 | 98 | 70 |
137 | 110 | 70 |
148 | 138 | 70 |
150 | 110 | 100 |
155 | 137 | 70 |
165 | 147 | 70 |
165 | 80 | 70 |
193 | 176 | 70 |
194 | 129 | 55 |
200 | 60 | 60 |
Outter diameter(mm) | inner diameter(mm) | thickness(mm) |
16.2 | 12.4 | 2 |
30 | 26 | 2 |
42 | 0 | 2 |
84 | 54 | 6 |
92 | 60 | 6 |
98 | 72 | 6 |
105 | 58 | 6 |
107 | 76 | 6 |
112 | 76 | 6 |
129 | 98 | 15 |
134 | 94 | 7 |
148 | 120 | 16 |
153 | 118 | 6 |
160 | 97 | 20 |
164 | 124 | 7 |
182 | 138 | 7.5 |
200 | 160 | 6 |
210 | 166 | 6 |
212 | 172 | 7 |
268 | 222 | 7 |
275 | 212 | 18 |
280 | 45 | 7 |
318 | 271 | 7 |
328 | 292 | 5 |
364 | 307 | 7 |
378 | 350 | 17 |
428 | 372 | 7 |
length(mm) | width(mm) | thickness (mm) |
33 | 24 | 15 |
80 | 50 | 30 |
80 | 80 | 1.5 |
106 | 55 | 25 |
106 | 70.5 | 45 |
195 | 35 | 6 |
250 | 250 | 5 |
400 | 400 | 5 |
Drinking water production (raw water as tap water, ground water, surface water, etc.),
Reuse of sewage (filtration of secondary effluent),
Pretreatment for RO membrane process (seawater desalination, wastewater reuse, industrial water production),
Reuse of industrial wastewater (waste water standard: SS < 30ppm, COD < 120ppm, BOD5 < 30ppm);
2. pH range: 3-10 (2-12 when doing cleaning);
3. Max. feed water turbidity: 15NTU;
4. Max. feed water pressure: 0.30MPa;
5. Pretreatment filter mesh size: smaller than 500 micron meter;
6. Oil concentration in raw water must be less than 2mg/L, otherwise it must be removed by pretreatment;
7. Design pure water flux: 1.5-5.0 m3/h;
8. Max. TMP (trans-membrane pressure): 0.15MPa (chemical cleaning is needed when TMP is more than 0.12MPa.);
9. Operating temperature range: 5-45 °C;
10. Max. free chlorine concentration in cleaning solution: 1000 mg/L;
11. Operation type: cross flow or full flow.
Contact Informations: