Complaint
| Products | Aluminum Checkered Plate | |
| Alloy State | HO, H12,H14,H18,H22,H24,H32,H111,H112,H114, T6 etc. | |
| Thickness | 1.2mm-100mm | |
| Width | 600mm-1650mm | |
| Rolling Material | DC & CC | |
| Grade | 1Series: 1050,1060,1070,1100 etc. 2Series: 2A06,2A10,2A12,2A16,2014,2017,2024,2124,2224,2524 ect. 3Series: 3003,3004,3005,3A21,3105 etc. 4Series: 4032,4043,4047 etc. 5Series: 5052,5754,5083, 5086, 5056,5652, 5154, 5254, 5454 etc. 6Series: 6061,6062,6083 ect. 7Series: 7A01,7A04,7005,7050,7075 etc. 8Series: 8011,8079 etc. | |
| Pattern | Big 5 bar pattern, Small brighten 5 bar, Diamond plate, 2 bar, Small 3 bar, etc. | |
| Surface | Embossed Brighten Surface | |
| Standard | GB/T, ASTM, EN | |
| Certificates | ISO, SGS | |
| MOQ | 5 MT-8MT for Customized Production of each size, excluding stock | |
| Packaging | Paper-interleaf each sheet+Water-proof Film+Wooden Pallets | |
| Origin | China | |
| Delivery | 15-20 days for CC route; 20-25 days for DC route production | |
| Loading Port | Any port of China, Tianjin & Qingdao in priority | |
| Our Advantage | No oil stain, no scratches, quite flatness; High Brightness; Plump and Uniform Pattern | |
Bar Thickness | Bottom Thickness | Bar Thickness |
| 1.2 mm-1.4 mm | 0.4 mm-0.6 mm | |
| 1.4 mm-1.9 mm | 0.8 mm-1.0 mm | |
| 1.9 mm-3.5 mm | 1.0 mm-1.2 mm | |
| 3.5mm-8.0 mm | 1.2mm and up | |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Other | Al | ||
| Single | Total | ||||||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.6 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.5 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | _ | 0.1 | _ | _ | 0.05 | 0.15 | 99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.05 | 0.15 | 99 | ||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | _ | 0.1 | _ | 0.05 | 0.15 | R | |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | _ | _ | 0.25 | _ | 0.05 | 0.15 | R | |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.20~0.6 | 0.1 | _ | 0.25 | 0.1 | 0.05 | 0.15 | R | |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | _ | 0.4 | 0.1 | 0.05 | 0.15 | R | |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | _ | 0.25 | _ | _ | 0.05 | 0.15 | R |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | _ | 0.1 | _ | _ | 0.05 | 0.15 | R |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
