Complaint
| Control System | Japan Mitsubishi Inveter, PLC and other components.(China unit: Servo/ Holip) | ||
| Dynamical Systems | Motor: SEW or Nord from Germany Factory.(China unit: SEJ/SERVO system) | ||
| Most stable brake system or Advanced Servo System, 220V~380V/50 -60HZ | |||
| Power: 0.75kw ~ 3.0kw(According to the size of door) | |||
| Fast Speed Gate Construction | |||
| Framework | In 2mm thickness cold-roll steel sheet or on request in Stainless steel INOX201/304, Plaint color accordingly to your order | ||
| Rolling Drum | 2mm thickness steel/Galvanized rube with machined blacks at each side and incorporating high-speed bearing. | ||
| Cross Bar | Normal in aluminum rod for small doors. Additional with Steel pipe for large opening and high-wind application. | ||
| Color | Red/Yellow/Blue/Sky blue/Orange/Mesh white and yellow/White/Green/Black/Grey. | ||
| Transparent Window | Transparent pvc sheet 1.5mm thickness. Window sizes and loaction accordingly to your requirement. | ||
| Command System | Magnetic Loop/Radar Sensor/Rope switch/Remote Control/Finger printer/Bluetooth/Key card etc. | ||
| Safety System & Seal | |||
| Photocell Sensor | Installed ont he side track with emergency rebound opening when sensing obstacles. | ||
| Safety edge bottom | When the people or vehicle touch the bottom edge of closing doors, It bound up automaticlly. | ||
| Emergency stop protection | With emergency stop button on the main control board. | ||
| Seal | Seal brush are installed inside of guider rail. Besides there is trap heavier fabric on the bottom, Close to any uneven ground. | ||
| Technical Parameter | Power Supply: Single or Three phase 220V~260V.. Three phase 380V~460V. 50/60HZ. | ||
| Max Size: 10m width * 15m height | |||
| Opening & Colsing speed: 0.7~1.5m/S | |||
| Operation Frequency: 1000~1500 Cycles/Day | |||
| Wind load: 15m/S | |||
Motor and Control Box:
Curtain Color and Detail drawing:
