Fast Speed Plastic Injection Product PP PE ABS Servo Injection Molding Machine

Fast Speed Plastic Injection Product PP PE ABS Servo Injection Molding Machine

Our Servo injection molding machine is energy-saving machine. It was driven by servo motor, fit for production of precise products.
We will equiped transformer for change different electricity power, such as 440V&220V

Our energy saving injection molding machines have some advantages make the choice!

1) Energy Saving
The pressure and flow differ in each stage of plastic injection. The RPM of the traditional oil pump motor is invariable, so the redundant oil just overflows into the oil and o lot of energy wasted.
Servo motor injection molding machine is able to control the RPM by computer, thus the hydraulic pressure matches the power needed in run, ensuring the quality of products with lower energy consumption. Also, high sensitive pressure feedback system helps achieving fast response close loop control.
Energy saving effect reaches to 30%~70%, especially more for products needing long cycle time.
2) High efficiency
The efficiency of the traditional electromotor is very low, and the power factor will contribute to the loss of power. However, the servomotor doesn't have this problem and will improve the efficiency by 10% than that of the traditional one.
3) Low Noise
The noise is much lower than that of standard injection molding machine. It operates with low noise.

 

		Unit	D160S
ITEMS			A		B		C
INECTION  UNIT	Screw Diameter	mm	42		45		50
	Screw L/D Ratio	L/D	21.4		20.0		18.0
	Shot Size(Theoretical)	cm 3	287		329		406
	Injection Weight	g	261		300		370
	Injection Pressure	MPa	212.8		185.4		150.2
	Injection Rate into Air	cm 3 /s	125	156.3	143.5	179.4	177.2	221.4
	Injection Stroke	mm	207
	Injection Speed	cm/s	9/11.3
	Screw Speed	rpm	202 /252
CLAMPING  UNIT	Clamping Force	KN	1600
	Clamping Stroke	mm	480
	Space Between Tie Bar	mm	470*470
	Max. Mold Height	mm	530
	Min. Mold Height	mm	200
	Eject Stroke	mm	150
	Eject Force	KN	34
	No. Of Ejector Pins	piece	5
OTHERS	Max. Pump Pressure	MPa	17.5
	Pump Motor Power	KW	15.0			18.5
	Heater Power	KW	9.4
	Hopper Capacity	Kg	25
	Oil Tank Capacity	L	350
	Weight	T	5.2

T-SLOT MOLD PLATEN


Italy, Intermot Plasticizing Hydraulic Motor

Famous brand of hydraulic valve