Description
TZM introduction: TZM is a special alloy based on Mo. Fine dispersed Ti-carbides are the reason of excellent strength properties at temperatures up to 1400°C.
The average nominal chemical composition in weight%:0.40-0.55 Ti
0.06-0.12 Zr
0.01-0.04 C
remainder Mo.
Compared with pure Mo, TZM has the following advantages:1) better creep resistance
2) higher recrystallization temperature
3) better high-temperature strength
4) better welding properities
5) higher tensile strength
Specification| Molybdenum sheets/plates |
| Thickness(mm) | tolerances(mm) | width(mm) | tolerances(mm) | length(mm) | tolerances(mm) | flatness(%) |
| 0.3mm | ±0.02 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.4mm | ±0.03 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.5mm | ±0.03 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 0.8mm | ±0.05 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 1mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 1.5mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 2mm | ±0.06 | 600mm | ±1mm | 2000mm | ±5mm | < 2% |
| 3mm | ±0.2 | 500 | ±1mm | 500 | ±2mm | < 2% |
| 4mm | ±0.2 | 500 | ±1mm | 500 | ±2mm | < 2% |
Use area1) Sintering and heat treatment furnaces.
2) Boats for annealing and sintering process
3) Used in high-temperature furnace construction and metal working.
Packing
1)paper wrapped the sheets, then plastic paper protected from moisture2)Foam board around the the inner wooden case3)Standard exported plywood case outside Payment Methods 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western UnionShipment Methods: Sea or Air transportation, train or expressTZM ranges of productsTZM rods, TZM sheets, TZM tubes, TZM boats and some machined hardwares.
Complaint
