Industrial Application Wireless WiFi GPS EVDO HSPA LTE 3G 4G VPN Router

 

H50series Industrial Application Wireless WiFi GPS EVDO HSPA LTE 3G 4G VPN Router



H50series GPS+EVDO ROUTER is a kind of cellular terminal device that provides data transfer function by public EVDO network and GPS function.

It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422) and Ethernet port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and Ethernet devices with only basic configuration. Also, it supports GPS function.

It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

 

 

Details

Features and Benefits

Design for Industrial Application
High-powered industrial cellular module
High-powered industrial 32bits CPU
High-powered industrial GPS module
Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
Housing: Iron, providing IP30 protection.
Power range: DC 5~35V

Stability and Reliability

Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
Ethernet port: 1.5KV magnetic isolation protection
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: Reverse-voltage and overvoltage protection
Antenna port: Lightning protection(optional)

Standard and Convenience

Support standard RS232(or RS485/RS422) and Ethernet port that can connect to serial and Ethernet devices directly
Support intellectual mode, enter into communication state automatically when powered
Provide management software for remote management
Support several work modes
Convenient configuration and maintenance interface(WEB or CLI)

High-performance

Support data transfer and GPS function
Support NTP server(optional)
Support VPN client(PPTP, L2TP, IPSEC and GRE)(only for VPN version)
Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
Support APN/VPDN
Support wireless video monitoring and dynamic picture transfer
Support DHCP server and client, DDNS, firewall, NAT, DMZ host etc.
Support multi protocols, such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, etc.

Specifications

Cellular Specification

\Cellular Module Industrial cellular module
Standard and Band CDMA2000 1X EVDO Rev A 800MHz, 800/1900MHz(optional),
450MHz (optional)
CDMA2000 1X RTT, IS-95 A/B
Bandwidth Download speed: 3.1Mbps, upload speed: 1.8Mbps
TX power <23dBm
RX sensitivity <-104dBm

GPS Specification

\GPS Module Industrial GPS module
Receiver Type 50-channle
GPS L1(1575.42MHz)C/A code
SBAS: WAAS, EGNOS, MSAS, GAGAN
Support GALILEO
Max. Update rate 4 Hz
Accuracy Position: 2.5m CPE
SBAS: 2.0m CPE
Acquisition Cold starts: 29S
Warm starts: 29S
Aided starts: <1S
Hot starts: <1S
Sensitivity Tracking: -160dBm
Reacquisition: -160dBm
Cold starts: -144dBm
Timing accuracy RMS: 30ns
99%: <60ns
Granularity: 21ns
Time pulse Configurable, 0.25 to 1000Hz

Hardware System

CPU Industrial 32bits CPU
FLASH 4MB(Extendable to 16MB)
SDRAM 32MB(Extendable to 64MB)

Interface Type

Ethernet 1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6, 7, 8
Stop bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator "Power", "Online", "GPS", "System", "Link/ACT"
Antenna Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
GPS: Standard SMA female interface, 50 ohm, lighting protection(optional)