Complaint
| Structure | Two 300 x 300 mm flat heating platens made of high temperature resistant Cr steel with max. working temperature of 300ºC 2000W Heating elements are inserted into the center of the heating plates for fast heating Max. Load on 300 x300 mm Heated Platen: 40 Metric Tons or pressure of 400 N /cm2 (40Kg/cm2) Two precision temperature controllers which control two heating plates separately with 30 programmable segments Water cooling jackets are built on the both top & bottom of the heating plates for assisting cooling |
Hydraulic Pump | Modified 40 T electric hydraulic press is connected to vacuum chamber. Movable distance between two heating plates: 15 mm Automatic max. pressure controlled via a digital pressure gauge. Pressure accuracy: +/-0.01 Mpa ( 0.1 kg/cm²) Two flat heating plates are installed with water cooling plates for Max. 300ºC working temperature Water cooling (>15L/min) is required to cool the heating plates when the operating temperature is over 200 ºC. |
Temperature control and Pressure Display | Two precision temperature controllers with 30 programmable segments control the heating plates separately with +/1°C accuracy. The temperature controllers have PID auto tune function, over-temperature protection and thermal couple broken protection Max. Temperature: 300°C with inert gas or vacuum with accuracy +/-1°C Max. Heating rate: 5°C/min Software and PC interface is built in the controller , which can be connected to a PC for computer controlling via a RS232 connector ( click picture left to see details ) Digital pressure meter ( controller ) is built outside the vacuum chamber. You can set pressure at the desired value which can stop the electric hydraulic press automatically |
Vacuum Chamber | Electric hydraulic press and heating plates are placed inside the vacuum chamber Vacuum chamber is made of SS304 with the size: 525Lx480Wx450H (mm) Vacuum chamber Capacity : about 75 Liters. 300mm dia. vacuum sealed hinged type door with 150mm Dia. quartz glass window is installed for easy sample loading and observation Silicone O-ring can be used for all vacuum sealing One precision digital vacuum gauge ( 10E-4 torr ) is installed on the vacuum chamber |
| Power Requirement | Power consuming: 3000 W Power input: 208 - 240V AC, 50/60 Hz single phase |
| Water cooling | One recirculating water chiller for cooling heating plate from over-heated and faster cooling. Please order separately at extra cost. |
Optional | Optional equipment are available at extra cost: Vacuum level for mechanical pump can reach <5 x10E-2 torr , and can reach 10E-4 torr with quality turbopump |
| Compliance | CE Certified |
Application Notes | Attention: Due to the high pressure gas output from the gas cylinder, it is necessary to install the gas pressure regulator with it to reduce the output pressure, avoid overpressurizing the furance chamber and ensure a safe operation. |
| Dimensions | Over-all: 775mm(L) x 550mm(W) x 1325mm(H) |
| Warranty | One year limited standard warranty (Extended warranty is available upto 5 years at extra cost) |
