Description
Place of Origin:Shandong, China (Mainland)
Model Number:KYDBL4830-2E
Motor Type:DC Motor
Product name:BLDC motor controller
Input volt:10-55VDC
Output volt:0-48VDC
Rated current:15A
Max current:30A
Application:AGV robot,Medical robot,Service robot,Tracked robot
Control mode:0-10V or manual OR RS232 OR CAN
Encoder:Encoder feedback
Weight:450g
Dimension:142* 117* 34mm Power range:
DC12-60V,Max continuous current:15A max peak current:30A
2 channels output,Four quadrant working mode, regen brake
Working mode:
Independence mode,mix mode, Speed mode,torque mode,position mode
Feed back:
Hall sensor ,incremental encoder
Control mode:
Potentiometer
Over current ,over heating,over voltage,short circuit
CAN RS 232 communication,see the detailed communication protocol when using it.
Suitable for brushless dc motor, brushless servo motor
| Wide-range voltage input | 10-55V |
| Continuous current/ max current | 15A/30A |
| Working mode | Speed mode, torque mode, position mode |
| Working temperature | -20ºC-- +60ºC |
| Ambient humidity | Relative humidity≤80RH |
Impulse input range | 500Hz-5000Hz |
Dimension | 142*117*34mm |
Weight | 450g |
Product Application
KYDBL4830-2E is an intelligent brushless DC dual channel motor controller. The brushless dual-channel motor driver can control two brushless DC motors at the same time. It adopts 32-bit high-performance MCU and advanced movement processing algorithm to realize internal electric differential function. The controller uses the Hall signal inside the motor as the rotor position feedback and works with the external incremental encoder (1000-2500 line) signal to control the movement of motor, realizing speed open-loop, close-loop modes, position mode and torque mode. It has two-way independent driver chip, two-way encoder processing chip, two-way Hall signal processing chip. Meanwhile, it has multiple failure alarm functions. It has two working modes: independent mode and mixed mode.
Independent mode: It can realize fully independent control of two-way motor, and the control signal part is controlled by two-way input signals. Two-way brushless DC motor can control the speed and direction of motor, separately.
Mixed mode: It can realize the synchronous control (forward, backward, left and right rotation) of two brushless motors.
The control signal has as many as 8 modes (wireless remote control, rocker, potentiometer, analog quantity, frequency, pulse width, RS232, CAN bus).| SPECIFICATIONS |
Volt | Volt | V | 10-55VDC |
| PWOER | W | 600 |
| Net Power | W | 600 |
Work mode | Speed open-loop | | |
| close-loop control | ° | |
| torque close-loop control | | |
control mode | 0-5V analog quantity or pulse command control mode |
| RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode. |
| potentiometer, analog quantity, frequency, pulse width, RS232, CAN bus |
Complaint
