Description
Pavement Construction Machinery Concrete Slipform Paver This is a new kind of concrete curb paver, hammer feeding, with manual and automatic control system. It is a high-tech machinery, integrative technique of mechanics-electronics-hydraulics, with advanced sensors, the machine itself can adjust the level and straight, makes the construction easily. Molds can dismantle and change in order to meet the construction requirements.
Advantages:1.With HONDA gasoline engine or YANMAR diesel engine2.With imported Danfoss hydraulic variable plunger pump3.Integrated micro computer control panel, easy operation4.Forward, Reverse and Steering all controlled by control lever, easy operation5.With hydraulic rod, high frequency and strong power6.With high sensitivity tilt sensor, to control direction7.With imported U.S.A Eaton driving motor8.With hydraulic high pressure washing pump, can clean machine any time9.With imported Germany DEUTSCH connectors, waterproof and dustproof
Technical parameters: | Type | LDHM31 |
| Engine | |
| Model | HONDA GX630 |
| Type | Gasoline Engine, air cooled, two cylinder |
| Power | 20hp/3600rpm |
| Fuel tank volume | 60L |
| Lubricant L | 1.5L |
| Fuel consumption | 313g/kWh |
| Traveling system | |
| Driving | Hydraulic motor |
| Wheel | Solid puncture-proof type |
| Speed | 0-70m/min |
| Vibration system | |
| Vibrating rod | Hydraulic vibrating rod |
| Nominal amplitude | 1.5mm |
| Vibrating frequency | Adjustable |
| Exciting force | 11kN(under 10000rpm) |
| Control system | |
| Control mode | Auto/Manual |
| Automatic control | Steering, Transverse slope and Longitudinal slope by high accuracy sensor |
| Clean system | |
| Power | Hydraulic motor |
| Theoretical flow | 20L/min |
| Theoretical pressure | 7Mpa |
| Working | |
| Speed | 0-15m/min |
| Mold size | Width 100cm*Height 60cm |
| Dimension | |
| Overall dimension | 2610x1970x1500mm |
| Weight | |
| Weight | 1200kg |
Complaint
