The company has a complete range of products, which are widely used in transportation facilities, aluminum profiles, metal cabinets, hardware tools, household appliances, storage facilities, sports products, metal castings, engineering machinery, building materials, logistics equipment, oil and gas pipelines and many other fields.
We are continuously seeking improvements and innovation for our products and services, while we constantly strive to find new and better ways to meet our customers' needs and exceed their expectations. For us, your satisfaction is what matters the most that is why we will provide the best value through continuously improving our processes and cost structure.
| Coating performance |
| Test items | Inspection standards | Test indicators |
| High light | Glazed/ Matte /Low light |
| Heat resistance | 110°C/24 hours(white) | Good gloss retention, E≤0.3-0.4 |
| Florida weathering exposure | ISO2810 | South 45 °,12mons | Gloss retention≥50% |
| Artificial accelerated aging | 60°C/8hours + 50°C/4hours ondensing, cycle for 500 hours | Gloss retention≥50% Color stability:E≤0.35 |
| Annotate | 1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. |
| 2.The above coating performance may be lower as shiny and slightly lower. |
Construction requirements :If your are currently using powder from someone else , or you are currently using our powder but different color specie, you must have your painting system completely clean before the job, that will keep you away from powder messing up and kind of failed coating or color defects by pollution issue.1,Keep your device and work environment clean to go, that will prevent large particle to show up on coating by avoiding dust going in.2,Recycled powder would pass through filter mesh 140 before the job
3,Workpiece must perfectly pass through pretreatment stage to make sure no residue left but that phosphate film ready to go, no grease, no rust,nothing left to fail adhesion force.
4,Electrostatic gun will have shoot voltage shift from 50kv to 90kv,Gives excellent atomization work, and spray powder equally like a even work. 5,Target Temperature 200±5ºC(workpiece temperature) 10 minutes will do curing job, do over limit would make your coating poor as far as you do.
6,Make sure your ventilation and static ground work well, so pollution will be limited in control and worker will be secured. 
Complaint
