Description
High Quality Tension Clamp Dean End Guy Grip
Description: The ANZD series tension sets are manufactured to hold the ADSS cable, and feature in the simple and stable structure, easy to install and low price.Features: 1. Stress is distributed equally, without stress focus.
2. Easy installation and no tools required
3. Right-hand lay strand.
4. The grip strength is not less than 90% of rated pulling tension strength, completely satisfying the needs of setting up the cable.
5. All wires are chamfered at the ends
6. Inner lining of the harness: The inner surfaces of the preformed is coated with abrasive resin & oxide grit, which does not spoil the aluminum clad to increase friction between the wire and the harness
7. Number of rods of the harness (n): 4 <-n <-8Application: 1.Short span length 200m
2.Terminal pole tower, tension pole/tower,
3.Pole/tower with corner angles greater than 15°and RTS no more than 20kN
4.Suitable for city ADSS cable installation.
Material:| S.No | Description | Qty | Material |
| 1 | Preformed dead-end | 1 | Aluminum clad steel |
Technical data: Rated Tension Strength (RTS): 20kN
Recommended span length: 200m| Product Model | Cable diameter(mm) | Dead-end armor rod(mm) | Anchor Shackle |
| ANZD-200-10.0 | 9.0-10.0 | 1200 | U-7 |
| ANZD -200-11.1 | 10.1-11.1 | 1200 | U-7 |
| ANZD -200-12.2 | 11.2-12.2 | 1200 | U-7 |
| ANZD -200-13.3 | 12.3-13.3 | 1200 | U-7 |
| ANZD -200-14.4 | 13.4-14.4 | 1200 | U-7 |
| ANZD -200-15.5 | 14.5-15.5 | 1200 | U-7 |
| ANZD -200-16.6 | 15.6-16.6 | 1200 | U-7 |
| ANZD -200-17.7 | 16.7-17.7 | 1200 | U-7 |
| ANZD -200-18.8 | 17.8-18.8 | 1200 | U-7 |
Complaint
