150kW Quality Gas Generator for 1000 Cubic Meters Digester
Biogas technology is a kind of rural energy engineering technology, which aims to deal with livestock manure, crop, food waste, food processing waste and municipal solid waste, so as to realize the agricultural ecological virtuous cycle. It has the characteristics of controlling environment pollution and providing renewable biomass energy to society, highly valued by many countries in the world, especially in the aspect of reducing greenhouse gas emissions for developing countries. It is truly a powerful measure to mitigate the environmental and energy crisis, with a positive impact on agriculture, environment society as well as economy.
Biogas is primarily methane (CH4) and carbon dioxide (CO2) and may have small amounts of hydrogen sulphide (H2S), moisture and siloxanes. The gases methane, hydrogen, and carbon monoxide (CO) can be combusted or oxidized with oxygen. This energy release allows biogas to be used as a fuel; it can be used for any heating purpose, such as cooking. It can also be used in a gas engine to convert the energy in the gas into electricity and heat. | Typical composition of biogas |
| Compound | Formula | % |
| Methane | CH4 | 50-75 |
| Carbon dioxide | CO2 | 25-50 |
| Nitrogen | N2 | 0-10 |
| Hydrogen | H2 | 0-1 |
| Hydrogen sulfide | H2S | 0.1 -0.5 |
| Oxygen | O2 | 0-0.5 |
Biogas generator is a common device in the utilization of biogas, as it has the characteristics of gen efficiency, energy saving, safety and environmental protection, widely distributed energy at low price.
Requirements for Biogas Genset
Within 1m from pressure regulating valve of gas intake1. Gas temperature ≤ 40ºC
2. Pressure 3~20kPa, Pressure changing rate ≤ 1kPa/ min
3. H2S ≤ 200mg/ Nm³
4. NH3 ≤ 20mg/ Nm³
5. CH4 content ≥ 40%, changing rate ≤ 2%/ min
6. Impurity particle size ≤ 5μm, impurity content ≤ 30mg/ Nm³
7. Moisture content ≤ 40g/ Nm³
Technical Parameters of Biogas Genset| Rated Voltage | 400V/230V |
| Phase | 3 phase,4 wire |
| Rated Frequency | 50Hz/ 60Hz |
| Power Factor | 0.8 |
| Voltage Regulating Range | 95-105% |
| Voltage Steady State | ≤±2% |
| Voltage Transient State | ≤±10% |
| Voltage Settling | ≤1s |
| Voltage Volatility | ≤±0.5% |
| Frequency Steady State Regulation Rate | ≤0.5% |
| Frequency Transient State Regulation Rate | ≤±10% |
| Heat Consumption | ≤11.38mj/kw.h |
| Pressure | 3-20kpa |
| Intake Moda | Natural intake |
| Sparking Mode | Sparking pl |
| Voltage Regutation Mode | Automatic |
| Speed Regutation Mode | Electronic speed regulate |
| Lubricating Mode | Pressure and splash |
| Cooling Mode | Circulating water cooling |
| Starting Mode | 24V electric motor |
| Overhaul Time | ≥30000h |
| Noise | ≤105db(A) |
| Exhaust temperature | ≤650ºC |
Complaint
