48V 45A/60A MPPT Solar Charge Controller for Solar Power System

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 118 ~ 138

Description
PC1600 Series 45A/60A 24V/48V MPPT Solar Charge Controller
Support a wide variety of system designs
Must PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.

PV system designers met the challenge of delivering both grid-tied savings during normal times and off-grid independence during emergencies with 1-phase arrays of Must IPV3000W/IPV5000W inverter/chargers powering your house. This system saved money on utility bills, supply essential power during emergencies (all with one versatile system).

Features:
· 45A/60A MPPT solar charge controller
· 24V/48V auto work
· PV Output: 70V-145V
· Several seconds tracking speed
· High Tracking efficiency of 99%
· Multiphase synchronous rectification technology
· Peak conversion efficiency of 98%
· DSP processors architecture ensures high speed and performance
· Multifunction LCD displays system data and status
· Four stages charging optimizes battery performance
Electronic Protections:
· PV array short circuit
· PV over current
· PV over voltage
· PV reverse polarity
· Battery reverse polarity
· Over charging
· Overheating protection


A charge controller's main job is to optimize a PV array's output which can fluctuate based on shading and temperature variables found on the average roof.

Must™ PC1600 Charge Controllers truly represent innovation in Maximum Power Point Tracking (MPPT) technology, which enables them to increase the yield from a solar photovoltaic (PV) array as much as 30% over conventional designs. PC1600 Charge Controllers support a wide variety of system designs, battery chemistries, and integrate seamlessly in terms of system data management and programming.

The innovative PC1600 MPPT software algorithm is both continuous and active, increasing photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both PC1600 Charge Controllers can operate at their full maximum current rating, 40 AMPS or 60 AMPS respectively, in ambient temperatures as high as 113° F (45° C).

PC1600 Charge Controllers incorporate the features developed by Must™ , including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built in, backlit 70-character display shows the current status and set the key parameter at the touch of a button.

Specification
ModelPC16-4515FPC16-6015F
Default Battery system Voltage24v/48vdc(adjustable)
Charge Input
PV Open Circuit Voltage rangeOperational max=145VDC temperature correct VOC
Max PV input power(24v)1200W1600W
Max PV input power(48v)2400W3200W
Battery voltage
Nominal Voltage24V / 48V
Absorption Voltage27.0V / 54.0V
Refloat Voltage27.4V / 54.8V
Float Voltage28.6V / 57.2V
Low voltage protection point21.0V / 42.0V
DC Output
Output Voltage22.0-28.6V / 44V-57.2V
Rated Current45A continuous @40 ambient60A continuous @40 ambient
Warning for low voltage23.0V / 46.0V
Cut off for low voltage21.6V / 43.0V
Low voltage recovery26.0V / 46.0V
Display
LED indicationSystematic operation, LV indication, LV protection, over charge protection, loads protection, short circuit protection
LCD display(optional)Charge voltage, charge current, voltage of storage battery, capacity of storage battery, output current
Alarm Protections1.PV array short circuit protection, PV reverse polarity protection 2.Battery reverse polarity protection , Over charging protection 3.Output short circuit protection 4.Low voltage protection for storage battery
General specification
Protection LevelIn compliance with regulations of DIN EN60529 and standards of IP22
Charge modePWM ,constant current_constant voltage, function of automatic protection for storage battery
Radiating modeFan cooling
Working modeGeneral controller
Efficiency≥98%
Self -consumption< 10mA< 15mA
Environment
Environmental temperature-10 --55
Ambient humidity0--90%,No condensation  
Altitude≤4500m
Dimension
Unit size D*W*H(mm)/G.W(kg)257.1*167.6*82.9mm/3kg
Package size D*W*H(mm)/G.W(kg)390*365*365mm(6pcs/carton)/19kg




Product Tag:
Related categories:
Scroll to Top