Complaint
| Output Power | 130W |
| Speed(r.p.m) | 0-16000rpm |
| Noise(db) | ≤75 |
| Sterilization | ≤135ºC |
| Operation voltage(V) | 14.4V |
| Hand-piece Unit Rise in Temperature | ≤25ºC |
| Charging Time | About 3 hours |
| Gross Weight | 5KG |
| Radial Run-out | ≤ 0.5mm |
| Battery Type | Ni-MH |
| Charger Input Voltage | AC 220V, 50Hz |
| Charger Input Power | 30VA |
| Charger Output Power | 14.4V, 900mA |
| 1. The device is forbidden to be demolished by non-professionals. If any problem, please contact with us for after sales service. |
2. Our products are chargeable, it can match for electricity source 110V60Hz-220V/50Hz. |
| 3. The battery needs to be taken out of the machine's mobile phone, otherwise a small automatic discharge will shorten the battery life. |
| 4.The battery cannot be disinfected. The battery space should be dry after sterilization. |
| 5. Saw blade, the drill bit is cleaned with a purifier and kept dry after operation |
| 6. The sterilization temperature is lower than 135 degrees Celsius. If it exceeds 135 degrees Celsius, the motor will be damaged. |
| 7.Professional manufacturer with 24 hours online service , warranty offered, CE marked. |
| Product | Speed | Noise | Diameter run-out | Torque |
| Normal bone drill RJ-0110 | 0-1300 r/m | ≤ 65db | ≤ 0.5mm | ≥ 1.6NM |
| Cannulated bone drill RJ-0210 | 0-600 r/m | ≤ 65db | ≤ 0.5mm | ≥ 3.5NM |
| Oscillating saw RJ-0310 | 0-18000 osc/m | ≤ 75db | ||
| AcetabulumSlow drill RJ-0410 | 0-300 r/m | ≤ 65db | ≤ 0.5mm | ≥ 6.5NM |
| Sternum saw RJ-1810 | 0-15000 ocs/m | ≤ 75db | ||
| Craniotomy drill RJ-1510A | 0-900 r/m | ≤ 40db | ||
| Craniotomy mill RJ-1510B | 0-40000 r/m | ≤ 40db | ||
| Grinding drill (RJ-JZ-2) | 0-40000 r/m | ≤ 65db | ≥1.25NM |
