Complaint
1. Small Capacity: 30,000 to 130,000 m3/ year.
2. Size:4x8ft,6ftx9ft, 6x8ft, thickness 9~30mm.
3. Wide Raw materials range: small wood log and branches,veneer waste, wastes of wood processing mills&furniture factories.
4. Advanced single-pass drum dryer could be used. It adopts flue gas drying technology, high drying capacity, reduced engery consumption. Compared with traditional drying methods, it save 25%energy.
5. Low adhesive usage. Electronic dosing is used.
6. Mat forming adopt advanced mechnanical calssifying mat forming. The unique spiral pattern of diamond rolls ensure ideal forming performance, increase the panel quality.
7. Multi-opening hot press with synchronized closing device, which ensures the synchronization and stability of plate moving, thus accurate panel thickness and reduce sanding amount.
8. Electrical control system: famous brand quality electric compoments and PLC control systems.
2. Parameters:
| Equipment Type Technical Parameters | BY114×8/15-10II |
| Nominal Gross Pressure | 15000KN |
| Direction of Feeding Plate | Vertical |
| Layer Counting | 10 |
| Distance Between Hot Platens | 120mm |
| Numbers of Hot Platens | 11 |
| Dimension of Hot Platens | 2700×1560×100 |
| Numbers of Cylinder | 6 |
| Diameter of Cylinder | Φ360mm |
| Stroke of Cylinder | 1200mm |
| Pressurization | ≤26 Mpa |
| Diameter of Powerful Nitrogen Tank | Φ1300x4800mm |
| Simultaneous closing device | With |
| Empty Closing Time | About 11s |
| The flux of Accumulator | 3000 L/Min |
| Low Pressure Pump Flowing | 355 ml/r |
| Power of Low pressure pump | 18.5kw |
| High Pressure Pump Flowing | About 63 ml/r x2 |
| Power of high pressure pump | 22kw x2 |
| Middle Pressure Pump Flowing | 160 ml/r |
| Power of Middle pressure pump | 45kw |
| Allowed Pressure | 15 Mpa |
| Power | 45kw |
| Max Pressure of Unit Plate Blank | 48 Kgf/2 |
| Control Method | Automatic pump station |
| Electrical Appliance | Siemens /Delta |
| Hydraulic Valve | Shanghai |
| Frame Pattern | Composite Frame |
| Thickness of Upper And Lower Crossbeams | 800mm |
| Thickness of Steel Plate | 40,30,20,12mm |
| Thickness of Plateform above | 300mm |
| Thickness of Steel Plate | 35,30,20mm |
| Steel Plate Of Upright Column | 40,12mm |
| Thickness of Active Crossbeam | 450mm |
| Thickness of Steel Plate | 30,20mm |
| Overall Dimensions | 3200×2700×5100mm |
| Total Weight | About 95,000Kg |
