Complaint
Features & Specifications
Using the south Korean PC7440 chip
Effective Pixels: PAL 512(H)X582(V); NTSC 512(H)X492(V)
Horizontal Resolution: 480 TVL
Minimum Illumination: 0.1Lux
Lens: 1.9mm
Lens Angle: 170 degree
Synchronization: Internal synchronization
Signal to noise ratio: >48db
Signal System: PAL / NTSC
Electronic Shutter: Auto
Video Output: RCA interface, 1.0Vp-p, 75Ohm
White Balance: Auto
Backlight Compensation: Auto
Power: DC 12V
Current Consumption: 50-60mA, Max 130mA with IR on
Operating Temperature: -20~+60, RH95% Max
Storage Temperature: -30~ +80, RH95% Max
Video cable length: 6m
Power supply cable length: 1.5m
100% brand new,High quality
Easy installation
Take one minute get your camera become a wireless camera
Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
Work Range:Up to about 80m(Hollowness)
Connects to rear-view camera and front video screen
Power: DC 12V
Transmitter/Receiver Cable Length:1.5m
Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit.
Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end.
The transmitter also includes a handy pass through for the power so you can connect it inline with your camera.
Wireless transmitter with male phono plug and male 2.5mm power plug for supplying power to the camera.
Wireless receiver with male phono plug for connection to monitor.
