Pit Needed Scissor Car Parking Lift

Introduction

VRC (Vertical Reciprocating Conveyor) is a transportation conveyor moving car from one floor to another, it is a highly customized product, which could be customized according to customers' different requirements from lifting
height, lifting capacity to platform size!
-S-VRC is a kind of car or goods lift, and industry use vertical table lift
-A foundation pit is needed for S-VRC
-The ground will be flat after S-VRC descend to bottom position
-Hydraulic cylinder direct drive system
-Double cylinder design
-High precision and stable hydraulic drive system
-Automatic shut-off if operator releases the button switch
-Small space occupation
-Pre-assembled structure makes easier installation
-Remote control is optional
-Double levels of platforms are available to have more parking
-Top quality diamond steel plate
-Hydraulic overloading protection available

 

Model	S-VRC
Lifting capacity	2,000-30,000 kg*can be customized according to your requirement
Lifting height	3,000-15,000mm*can be customized according to your requirement
Platform length	2000mm-6000mm*can be customized according to your requirement
Platform width	2000mm-5000mm*can be customized according to your requirement
Platform material	Diamond steel sheet (standard) / 4mm Aluminum steel sheet (optional)
No. of level	according to your requirement
Drive mode	Hydraulic
Operation	button switch (standard) / remote controller (optional)
Power pack	5.5 kw hydraulic power pump
Lifting speed	4m/min
Finishing	Powder coating
Color	Caccording to your requirement

Maintenance and Service
(1) Keep clean
Keep this automobile lift clean. Before cleaning, turn power off to assure safety.
(2) Keep the workplace clean. Too much dust will wear the parts and shorten their service life.
(3) Check the chains
Check the chains are in good conditions. In case of chain failure, repair it immediately to prevent an accident.
(4) Maintenance of the hydraulic system
Cleaning and oil replacement
After three months' use of this automobile lift, clean the hydraulic system and replace 30# hydraulic oil. After
that, clean the hydraulic system and replace 30# hydraulic oil once every six months.

Packaging
Standard packaging:
At MUTRADE, we offer professional steel frame packaging for easy and stable container load. The main structure
of S-VRC has be pre-assembled in our plant, and one package will contain all the parts.

Q & A

1. Is this product can be used indoor or outdoor?
S-VRC can be installed both indoor and outdoor as long as the site dimensions are enough.
2. What is the pit dimensions needed for S-VRC?
The dimensions of pit depends on platform size and lifting height, our technical department will provide you
the professional drawing to guide your excavation.
3. What is the surface finishing for this product?
It's paint spray as standard treatment, and optional aluminum steel sheet can be covered above for better
water-proof and looking.
4. What is the power requirements? Is single phase acceptable?
Generally speaking, a 3-phase power supply is a must for our 4Kw motor. If the usage frequency is low (less
than one movement per hour), a single phase power supply can be used, otherwise it may lead to motor
burnt out.
5. Can this product still operate if electricity failure happens?
Without electricity the FP-VRC cannot work, so a back-up generator may be needed if electricity failure
happens often in your city.
6. What is the warranty?
It's five years for main structure and one year for moving parts.
7. What is the production time?
It's 30 days after prepayment and final drawing confirmed.
8. What is the shipping size? Is LCL acceptable, or it must be FCL?
As S-VRC is a fully customized product, the shipping size depends on the specications you need.
As the structure of S-VRC is pre-assembled, the package will take most space of container, LCL cannot be used.
20 feet or 40 feet container is necessary as per the platform length.

Reference Pictures