Complaint
Xingtai wire rope press machines are used to make pressed wire rope sling. The body of swagers are manufactured from one single block construction that ensure strength, long service life and a minimum of maintenance. All swagers are thoroughly test run and are supplied with a full tank of oil.
1. It uses a mechanical and electrical design, to switch to a different mold, you can suppress the different specifications of wire rope, easy to operate and safe.
2. Dual control for hydraulic system, the overflow valve, magnetic contact on the pressure gauge can be accurately controlled.
3. Electric control parts of the low-voltage control, an increase of operating system security.
4. Pull the rope to suppress large, beautiful, fast, and a wire rope press-fit just a few minutes to complete, significantly reduced the labor intensity and improve the work efficiency.
5. Xingtai wire rope press machine have exported to many countries, UK, Australia, Holland, Latvia, Malaysia, Thailand, India, Nigeria, Russia, Botswana and so on.
| Mode No. | GT-100T | GT-200T | GT-300T | GT-400T | GT-650T | GT-1000T |
| Max press power (KN) | 1000 | 2000 | 3000 | 4000 | 6500 | 10000 |
| Max wire rope diameter in one pressing (mm) | Φ13 | Φ20 | Φ24 | Φ30 | Φ38 | Φ44 |
| Max wire rope diameter in multi-pressing (mm) | Φ15 | Φ22 | Φ32 | Φ36 | Φ48 | Φ56 |
| Power (KW) | 1.5 | 2.2 | 2.2 | 3 | 5.5 | 11 |
| Max working pressure (Mpa) | 56Mpa | 56Mpa | 56Mpa | 56Mpa | 56Mpa | 56Mpa |
| Max piston movement (mm) | 78 | 80 | 80 | 80 | 160 | 200 |
| The up speed of piston (mm/sec) | 8 | 8 | 4.5 | 4.5 | 4.5 | 4.8 |
| The down speed of piston (mm/sec) | 10 | 10 | 4.5 | 4.5 | 8 | 10 |
| Total length (mm) | 1100 | 1100 | 1200 | 1200 | 1550 | 2550 |
| Total width (mm) | 550 | 550 | 650 | 650 | 650 | 1100 |
| Total height (mm) | 1300 | 1300 | 1400 | 1400 | 1600 | 2100 |
| Net weight (kg) | 600 | 800 | 900 | 1000 | 3000 | 5500 |
Pacakge of Hydraulic Steel Wire Rope Sling Swage Machine
Q: Are you trading company or factory?
A: We are professional wire rope pressing machine and wire rope annealing machines manufacturer with 20 years' experience.
Q: What is after-sales services?
A: 24 hours around the clock & 12 months warranty
Life-long maintenance service for the product
Q: If I didn't use press machine before, how can I install and operate the machine?
A: 1. Fix fitted mould, tight the bolts on the left of both tool set ( the tool is offered by factory);
Refer diameter of wire rope table to adjust pressure, put sleeve with steel wire rope in the middle of mould Vertically.
2. Operate pedal rise switch, the piston will rise and the rising pilot lamp lights; Auto-stop when
reach given pressure and finish pressing;
3.Operate descendent switch, the piston will descend and the descendent pilot lamp lights; and take out pressedsteel wire rope.
We will delivery machine with use manual and CD.
Q: Shall I see the machine work before I order?
a. Please send us inquiry and we will check whether there are customers in your country.
b. You may come our factory, we will teach you how to operate.
c. We may send you video.
Q: How long to finish one machine if I place order?
A: As usually, delivery time is 30 days. If we have machine and dies that you need in stock, we may delivery machine in 7-10 days after receipt of your payment.
Q: How can we believe your quality or service?
A: We have many oversea customers, you can contact them to know more about us. Maybe we have customers in your country, you may call them or visit them to see our machine.
If you have any other question please do feel free to contact us.
